DuraTrax Onyx 230 AC/DC Advanced LiPo/NiCd/NiMH Charger w/LCD DTXP4230


Item # DTXP4230
$119.99 $79.99
(You save $40.00)
Status: Out of stock
DuraTrax Onyx 230 AC/DC Advanced LiPo/NiCd/NiMH Charger w/LCD DTXP4230

More information about DuraTrax Onyx 230 AC/DC Advanced LiPo/NiCd/NiMH Charger w/LCD DTXP4230

This is the DuraTrax Onyx 230 AC/DC Peak Charger with Backlit LCD. This charger's wide output current and voltage range make it equally useful for 1/32 scale micros up to 1/8 scale electrics as well as transmitter packs and nitro receiver packs. Also charges LiPo, Li-Ion, and LiFe packs.


  • Charges 1-8 cell NiCd or NiMH (1.2 - 9.6V) cells and 1-3 cell LiPo
  • Li-Ion or LiFe (3.7 - 11.1V) cells
  • Fully adjustable charge currents and multi-chemistry adaptability for a wide range of applications
  • Custom CC/CV charge algorithm carefully charges Lithium Polymer, Lithium-Ion or Lithium Ferrite-Phosphate (A123) batteries fully and safely
  • Pushbutton controls and audible tones for easy setup and control
  • Precise peak detection with automatic TRICKLE charge fills packs completely for optimum voltage and run time, 3 - 20mV adjustable peak detection helps to customize charger-to-battery performance
  • Built-in banana jacks allow connection with many common charge adapters, an adapter with Kyosho type plug is included
  • Built-in fan for long lasting performance
  • DC power lead with alligator clips easily connects to many 12V DC power sources
  • Custom reversed LCD with backlight for easy viewing in any condition shows input and output voltage, peak voltage, charge current, charge capacity and time and more
  • Small lightweight switching AC power supply delivers up to 7 amps of charge current
  • Solid-state reverse polarity and current overload safety devices
  • FIVE YEAR warranty

1x DuraTrax Onyx 230 AC/DC Advanced Peak Charger

Charge leads depending on battery:
DTXC2221 Charge Lead Banana to DNS Male
DTXC2222 Charge Lead Banana to Traxxas
DTXC2223 Charge Lead Banana to Mini Plug
HCAP0101 Futaba J Tx/Rx Charge Leads NO 9VAP
HCAP0102 Futaba J Tx/Rx Charge Leads 9VAP ONLY
HCAP0105 JR Tx/Rx Charge Leads
HCAP0106 Hitec/Airtronics Z Tx/Rx Charge Leads
GPMM3149 Charge Lead Banana/Deans Micro 

**Attention International Customers**
The AC input voltage of this charger is 110V.
**230 refers only to the model number**

AC Input: 110V AC 60Hz
DC Input: 11-15V DC, built-in lead with alligator clips
Battery Types: 1-8 NiCd or NiMH cells (1.2-9.6V) / 1-3 cell LiPo / LiFe (3.7-11.1V)
Battery Capacity Range: 50-9900mAh
Fast Charge Current: 0.1A, 7.0A linear adjustable (50W max., 2C limit for Lithiums)
Fast Charge Termination: Peak detection for NiCd/MH, CC/CV for Lithium
Fast Charge Safety Timer: OFF-300 minutes
Peak Sensitivity: 3 - 20mV adjustable
Trickle Charge Current: Automatic 1/20 fast charge setting (0-250mAh)
Input Control: 4-pushbuttons
Battery Memories: 10
Setup Tones: ON/OFF
Display Type: 2x8 reversed LCD with backlight
Audible Melodies: 5
Protective Devices: Solid-state reverse polarity and current overload
Case Dimensions: 6.0 x 5.28 x 1.69" (153 x 134 x 43mm)
Weight: 23.5oz (666g)