DuraTrax Onyx 235 AC/DC Advanced Charger with Balancing LCD DTXP4235

DuraTrax

Item # DTXP4235
$139.99 $89.99
(You save $50.00)
Status: In Stock
UPC:
753600542356
DuraTrax Onyx 235 AC/DC Advanced Charger with Balancing LCD DTXP4235

More information about DuraTrax Onyx 235 AC/DC Advanced Charger with Balancing LCD DTXP4235

This is the DuraTrax Onyx 235 AC/DC advanced charger with built-in balancer. Combines the proven features of the Onyx 230 with balancing and other asked for extras. It also charges LiPo, Li-Ion, and LiFe packs.

Includes:

  • DuraTrax Onyx 235 AC/DC advanced charger with built-in balancer and output adapters for Star Plug and standard connectors
  • Lithium balance adapters for ElectriFly and FlightPower/Thunder Power


Requires:

  • Charge Leads depending on type of battery;
  • Charge Lead Banana to Mini Plug
  • Futaba J Tx/Rx Charge Leads NO 9VAP, Futaba J Tx/Rx Charge Leads 9VAP ONLY
  • JR Tx/Rx Charge Leads
  • Hitec/Airtronics Z Tx/Rx Charge Leads
  • Charge Lead Banana/Star Plug


Note: When charging LiPo batteries, the main charge lead and the balance lead must be connected in order for the charger to operate. If only one connection is made, the charger will sound an alarm when charging is initiated.

  • Charges 1-10 cell NiCd or NiMH (1.2 - 12V) cells and 1-4 cell LiPo, Li-Ion or LiFe (3.7 - 14.8V) cells
  • Balancing jack for up to 4 lithium cells
  • Universal jack for charging radio batteries
  • Detachable AC and DC input power cords
  • USB jack for charging music players, cell phones and other accessories
  • Mini USB jack for downloading firmware
  • Custom CC/CV charge algorithm carefully charges Lithium Polymer, Lithium-Ion or Lithium Ferrite-Phosphate (A123) batteries fully and safely
  • Pushbutton controls and audible tones for easy setup and control
  • Precise peak detection with automatic trickle charge fills packs completely for optimum voltage and run time, 3 - 20mV adjustable peak detection helps to customize charger-to-battery performance
  • Built-in banana jacks allow connection with many common charge adapters, an adapter with Kyosho type plug is included
  • Built-in fan for long lasting performance
  • Custom reversed LCD with backlight for easy viewing in any condition shows input and output voltages, peak voltage, charge current, charge capacity and time and more
  • Small lightweight switching AC power supply delivers up to 5 amps of charge current
  • Solid-state reverse polarity and current overload safety devices

AC Input: 110V AC 60Hz - 240V 50Hz, detachable cord, 50W

DC Input: 11-15V detachable cord with alligator clips

Battery Types: 1-10 NiCd or NiMH cells (1.2-12V), 1-4 cell LiPo, LiIon or LiFe (3.7-14.8V)

Fast Charge Current: 0.1 - 8.0A linear (4C limit for Lithiums, 5A limit with AC input

Fast Charge Termination: Peak detection for NiCd/MH, CC/CV for Lithium

Fast Charge Safety Timer: OFF-300 minutes

NiCd/NiMH Peak Sensitivity: 3 - 20mV adjustable

NiCd/NiMH Auto Trickle Current: Auto (1/20 fast charge settings) or manual (0 - 250mA)

Battery Memories: 10

Protective Devices: Solid-state reverse polarity and current overload

Case size: 6.3 x 5.3 x 1.7" (160 x 134 x 43mm)

Weight: 19.7oz (559g) with DC cord attached