DuraTrax Onyx 255 AC/DC Dual Charger with Balancing DTXP4255

DuraTrax

Item # DTXP4255
$159.99 $99.99
(You save $60.00)
Status: In Stock
UPC:
753600542554
Availability:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(12, 131, 0);\'>Available Now!</b></span>
DuraTrax Onyx 255 AC/DC Dual Charger with Balancing DTXP4255

More information about DuraTrax Onyx 255 AC/DC Dual Charger with Balancing DTXP4255

This is the Duratrax Onyx 255 AC/DC dual charger with balancer. If you can own only one charger, it should be the Onyx 255. It can peak charge a 15-cell NiCd at the same time its balance charging a 6S LiPo—and do both anytime and anywhere there's AC or DC power. Push-buttons let you program up to 10 battery charging routines for easy reuse and reverse backlit LCD lets you easily view eight types of pack/cell data and safety alerts even when lighting conditions are at their worst.

Includes:

 

  • Duratrax Onyx 255 AC/DC dual charger
  • DC power lead with Alligator clips
  • Two Banana to Star Plugs
  • Two Banana to Standard
  • Two 2-6S balancing boards with JST XH connectors
  • Instruction manual

 

 

 

 


Note: Charge rates up to 6A, plus the ability to charge 1-15 nickel-based or 1-6S lithium cells make the Onyx 255 a match for any charging need. Dual outputs make it an especially good choice for models that use two packs simultaneously and modelers who run and recharge multiple batteries in a single session. Both outputs can peak charge NiCd/NiMH cells and balance 2-6S lithium packs for maximum voltage. Separate jacks make it as useful for radio packs as power packs. Simple menus, push-button controls, and a backlit, reversed LCD make it easy to use anytime, in any lighting anywhere there’s AC or DC power.

 

  • Each output charges single lithium cells, balances and charges 2-6S lithium cells and 1-15 cell NiMH/NiCd batteries
  • Charges different battery chemistries at the same time
  • Built-in 60W AC power supply for each output
  • Charge jack for 4, 5 and 8-cell receiver and transmitter packs
  • Charge rates of up to 6A for faster recharging
  • Simple push-button setup with confirming visual and audio cues
  • 0-300 minute safety timer, solid-state reverse polarity and current overload protection
  • Ten battery memory on each output, twenty total
  • DC power lead with alligator clips for connection to many 12V power sources

AC Input: 110V AC 60Hz

DC input: 11-15V DC

Output Power: 60W (AC & DC) for each output

Safety Protection Devices: Solid state reverse polarity and current overload circuitry, 0-300 minute safety timer, fan

Battery Capacity Range: 100-60,000mAh

Programmable Model Memories: 10 per output, 20 total

Fast Charge Current: 0.1-6.0A linear

Fast Charge Termination: Peak detection (NiCd/NiMH); cc/cv (Lithium batteries)

Ni Peak Sensitivity: 3-20mV, adjustable

Ni Auto-Trickle Current: 1/20 fast charge setting or 0-250mA (manual)

Lithium Balancing Accuracy: 5mV per cell

Lithium Node Current: 300mA, max

Display Type: 2x16 backlit, reversed LCD

Controls: Four push buttons

Input Connections: Detachable DC lead with alligator clips

Output Connections: Built-in banana jacks; built-in jack for 4, 5 and 8-cell radio packs

Case Size: 6.0 x 2.75 x 7.25" (152 x 70 x 184mm)

Weight: 19.5oz (554g) without cords

You Might Also Like...