Great Planes ElectriFly Triton EQ AC/DC Charger GPMM3155

Great Planes

Item # GPMM3155
$199.99 $99.99
(You save $100.00)
Status: In Stock
UPC:
735557431556
Great Planes ElectriFly Triton EQ AC/DC Charger GPMM3155

More information about Great Planes ElectriFly Triton EQ AC/DC Charger GPMM3155

This is the ElectriFly AC/DC TritonEQ charger, discharger and cycler with built-in equalizer.

ElectriFly Triton Jr. Upgraded Features

  • Lightweight built-in switching AC power supply with DC input capabilities
  • New reversed character LCD with backlight and 0-45° adjustable view angle
  • Built-in balancing for 1-6S LiPo, Li-Ion or LiFe (A123) cells with FlightPower and ElectriFly adapters


Includes: ElectriFly AC/DC TritonEQ with FlightPower and ElectriFly adapters, AC power cord, DC power cord with alligator clips and instruction manual

Requires:

  • Matching connector for discharge lead depending on battery
  • Futaba J Tx/Rx Charge Leads NO 9VAP
  • Futaba J Tx/Rx Charge Leads 9VAP ONLY
  • JR Tx/Rx Charge Leads
  • Hitec/Airtronics Z Tx/Rx Charge Leads
  • Charge Lead BANANA/DEANS MALE U
  • Charge Lead BANANA/DEANS MICRO
  • Charge Lead Banana Plugs To Traxxas Male
  • Charges 1-14 cell NiMH and NiCd cells and 1-6 cell LiPo, Li-Ion and LiFe (3.6, 3.7 or 3.3V cells)
  • Peak detection technology for NiCd and NiMH batteries and constant current/constant voltage technology for lithiums and lead-acid batteries
  • Ideal for radio batteries and with charge currents adjustable from 100mA to 5 amps (limited to 1C for lithiums) it can also handle large power packs
  • Built-in balancing for up to 6S LiPo, Li-Ion or LiFe (A123) cells with FlightPower and ElectriFly adapters
  • Discharge cutoff voltage can be adjusted for NiCd/MH, and is fixed for lithium and lead-acid batteries
  • NiCd and NiMH trickle current is automatically set at 1/20th of the fast charge current setting
  • Reversed LCD with backlight plus a 0-45º adjustable view angle clearly displays input and output volts, peak volts, individual lithium cell voltages, average discharge volts, charge and discharge capacity, currents and time, error messages and more
  • Touchpad controls and super-simple programming make for simplicity and reliability
  • Safety features include fast charge safety timer, current overload and reverse polarity protection

AC Input Voltage: 110V 60Hz - 240V 50Hz (detachable AC cord)

DC Input: 11-15.0V DC, with large alligator clips

Number of Outputs: One, banana jacks

Battery Types, # cells: 1-14 NiCd & NiMH, 1-6 LiPo, Li-Ion, or LiFe (3.6, 3.7 or 3.3V cells) and 2, 4, 6, 8, 10, 12V Pb (2V per cell)

Fast Charge Current: 0.1-5.0A (1C maximum for lithium’s) 63W max DC, 50W max AC

Fast Charge Termination: Peak detection NiCd, NiMH, cc/cv for Pb and lithium’s

Trickle Current (NiCd/MH only): Chg current / 20

Peak Sensitivity (NiCd/MH only): 8mV NiCd, 5mV NiMH

Peak Delay at Start (NiCd/MH only): 3 minutes

Fast Charge Safety Timer: NiCd/MH 1.5 hours, lithium’s 3 hours, or turn off

Lithium Balancing Accuracy: 5mV per cell

Lithium Balancing Connector: FlightPower and ElectriFly adapters included

Lithium Max. Node Current: 300mA

Discharge Current: 0.1-1.0A (5W max)

Discharge Cutoff Voltage: NiCd & NiMH 0.1-16.8V, LiPo & Li-Ion 3.0V per cell, LiFe 2.5V per cell and Pb 1.8V per cell

Cycle Count (NiCd, NiMH only): 1-5 cycles

Battery Memories: One

Programming Controls: Membrane touchpad, 4 buttons

Display Type: 2x16 reversed LCD w/backlight and adjustable angle

Audible Indicators: Beeper

Case Material: Aluminum and ABS plastic

Safety Devices: Solid-state reverse polarity and overload

Case Size: 5.9x6.0x2.3 in (150x153x58mm)

Weight: 23.8oz (675g, w/o AC power cord)