This is the E-Flite Turbo Timber 1.5m Electric-Powered Bind-N-Fly Basic Airplane with Floats, AS3X and SAFE Select Technologies. Many RC pilots got their first taste of flying a Short Take Off and Landing (STOL) capable airplane with the original E-flite Timber 1.5m model. Its fly-almost-anywhere abilities, friendly handling and nimble sport performance helped it become one of the most popular RC aircraft of all time. The Turbo Timber 1.5m marks the latest evolution of the iconic design with the addition of metal-geared servos, a 3S and 4S compatible power system, plus a turboprop-styled nose and 3-blade propeller for more performance and capabilities than ever before.
The Turbo Timber 1.5m is equipped with an unbeatable combination of features that make it possible for everyone from low-time to expert pilots to enjoy a versatile STOL and sport flying experience unlike any other. Shock-absorbing landing gear equipped with oversized, tundra-style wheels plus the optional-use float set and leading edge slats, functional slotted flaps and the LED light system from the original are all standard. Add to that a turboprop-styled nose, capped off with a 3-blade prop and spinner that are driven by a more powerful 3S and 4S compatible power system- supported by a stiffer airframe that's equipped with more durable and reliable metal-geared servos- and you have enhanced performance and capabilities that make this the most fun you can have with a Timber yet!
STOL (Short Take Off and Landing) Capable
The Turbo Timber's wing is designed with features like drooped wingtips, functional slotted flaps and to accept optional-use leading edge slats (included) for improved slow flight and STOL performance. These features, along with the lightweight design and high-power brushless motor, make it possible to spring into the air or float down to land in as little as two feet or less.
The factory-installed brushless power system features a 50-amp ESC plus a specially-tuned motor and 3-blade prop that deliver an abundance of thrust with a 3S LiPo battery, or more power and vertical performance with a 4S battery without the need for any modifications or upgrades.
Composite-reinforced, hollow-core construction with EPO material delivers a lightweight yet durable airframe. The Turbo Timber also features a stiffer wing that improves aileron authority and roll rates, plus it's equipped with more durable and reliable metal-geared servos all around.
No glue is required for assembly, and because the few parts that need to be assembled easily bolt into place, the Turbo Timber can be ready to fly in less time than it takes to charge the flight battery. The two-piece wing also makes transport and storage as convenient as possible.
1x E-flite Turbo Timber 1.5m with:
1x 50A Brushless ESC (installed)
1x Brushless Outrunner Motor (installed)
1x Spektrum AR636 6-Channel Receiver (installed)
6x Micro Metal-Geared Servos (installed)
1x Set of Optional-Use Leading Edge Slats
1x Set of Optional-Use Floats
1x Product Manual
Full-range, 6+ Channel DSMX/DSM2 transmitter
2200- 3200mAh 3S or 4S 11.1- 14.8V LiPo with EC3 or IC3 Connector (SPMX22003S30 or SPMX22004S30 recommended)
Compatible LiPo charger
Airfoil Shape: Semi-symmetrical
Approximate Assembly Time: Less than 1 Hour
Approximate Flight Time: 6 - 8 minutes
CG (Center of Gravity): 2.4" (60mm) +/- 0.20" (5mm) back from the leading edge of the wing measured at the fuselage
Charger: Required to match selected battery
Completion Level: Bind-N-Fly Basic
Control Throw (Flaps): Full, 1.4" (35mm), Half, 0.79" (20mm)
Control Throw - High (Ailerons): 1.2" (30mm)
Control Throw - High (Elevator): 0.87" (22mm)
Control Throw - High (Rudder): 1.4" (35mm)
Control Throw - Low (Ailerons): 0.87" (22mm)
Control Throw - Low (Elevator): 0.63" (16mm)
Control Throw - Low (Rudder): 0.98" (25mm)
Flying Weight: 57 - 60oz (1.61 - 1.7kg)
Landing Gear: Fixed main LG with steerable tail wheel
Length: 40.9" (1040mm)
Minimum Required Radio: 6-channel
Minimum Speed Control: 50A w/EC3 battery connector
Motor Size: 10 size, 800Kv brushless outrunner
Propeller Size: 11x7.5 3-blade
Recommended Motor Battery: 2200mAh 3 - 4S LiPo w/EC3 connector
Servos: 9g metal gear (6)
Stabilizer Tube Length: 11.8" (300mm)
Stabilizer Tube OD: 0.16" (4mm)
Transmitter Range: Full
Wing Area: 559.5 sq in (36.1 sq dm)
Wing Loading: 13.45 oz sq/ft (14.04 g sq/dm)
Wing Tube Length: 12.8" (605mm)
Wing Tube OD: 0.39" (10mm)
Wingspan: 61" (1555mm)