E-Flite V-22 Osprey VTOL BNF Basic Airplane EFL9650

E Flite

https://www.rcplanet.com/e-flite-v-22-osprey-vtol-bnf-basic-airplane-efl9650/
$269.99 $229.99
(You save $40.00)
Status: In Stock
Availability: USUALLY SHIPS FROM UT WITHIN 24 HOURS
(No reviews yet)
UPC:
605482278888
Availability:
USUALLY SHIPS FROM UT WITHIN 24 HOURS

Item # EFL9650

Build Type:
Bind-N-Fly
Power Type:
Electric Power
Skill Level:
Skill Level 3
Vehicle Type:
Airplane
More information about E-Flite V-22 Osprey VTOL BNF Basic Airplane EFL9650

This is the E-Flite V-22 Osprey VTOL Electric Powered Bind-N-Fly VTOL Airplane. The E-flite V-22 Osprey is the scale VTOL (Vertical Take Off and Landing) model you've always wanted. It's an officially-licensed replica of the unique and innovative Bell Boeing tiltrotor aircraft that combines the vertical functionality of a helicopter with the forward flight performance of an airplane. The exclusive flight control system makes it possible to fly in both helicopter/multirotor and airplane flight, and the optimized software makes the transition so simple and predictable that you will feel comfortable and confident even on your first flight. Simply flip the flight mode switch and the V-22 will automatically adjust the tiltrotor positions to transition into forward or hovering flight.

Best of all you can have the V-22 in the air in almost no time at all! The airframe arrives fully-assembled with a factory-installed flight controller, servos, motors and ESCs (plus a Spektrum serial receiver in the BNF Basic version). It's also factory-finished in multicolor paint, and the included decal sheet allows you to customize the finish with multiple military branch trim scheme options. The super-simple transmitter setup only requires assigning one switch for flight mode selection, then you're ready to install a fully charged 3S 11.1V 800mAh LiPo battery (sold separately) to fly. You also have the choice to install the landing gear with a castering nose wheel so you can taxi and perform 'rolling' take offs and landings, or you can leave it off to enjoy the 'retracted' gear look.

The E-flite V-22 Osprey's incredible vertical takeoff and landing capabilities, combined with its compact size and lightweight yet durable composite-reinforced EPO airframe, makes it possible to fly in places and spaces many other RC models can't. And no matter where you fly it, the V-22 delivers a scale VTOL flying experience that's unlike any other- and is a proud tribute to the groundbreaking original.

Includes:
1x E-flite V-22 Osprey VTOL
3x Brushless ESCs (installed)
3x Brushless Outrunner Motors (installed)
5x Sub-Micro Servos (installed)
1x Spektrum 4648 DSMX Serial Receiver with Diversity (installed)
1x Flight Controller (installed)
1x Decal Sheet
1x Set of Spare Main Props
1x Product Manual

Requires:
Full-range 6+ channel DSMX/DSM2 transmitter
3S 11.1V 800mAh 30C LiPo with JST Connector
Compatible LiPo charger

  • The scale VTOL (Vertical Take Off and Landing) capable model you've always wanted
  • Officially-licensed replica of the unique and innovative Bell Boeing V-22 Osprey tiltrotor aircraft
  • Combines the vertical functionality of a helicopter with the forward flight performance of an airplane
  • Compact size so it can be flown in more places and smaller spaces, including indoors
  • The exclusive and expertly tuned flight control system makes it all possible
  • Automatic transition between helicopter/multirotor and airplane flight
  • Stability and Acro flight modes deliver a wide range of performance
  • Super-simple transmitter setup- no complex programming required
  • Spektrum serial receiver with industry-leading DSMX technology
  • Powerful brushless motors compatible with 3S 800mAh batteries
  • Factory-installed flight controller, servos and power systems
  • Included decal sheet offers multiple trim scheme options
  • Lightweight and extremely durable EPO airframe
  • Factory-finished and no assembly required
  • FPV-ready (recommended camera and video transmitter sold separately)

Aileron: Dual servo control
Approximate Assembly Time: Less than 1 Hour
Approximate Flight Time: 4 minutes
CG (Center of Gravity): 0.98 - 1.2" (25 - 30mm) from the leading edge of the wing root
Charger: 3S LiPo compatible required
Completion Level: Bind-N-Fly Basic
Flying Weight: 14.75oz (418g)
Landing Gear: Wire nose gear and main gear foam wheels
Length: 19.2" (487mm)
Material: EPO foam
Minimum Required Radio: Full range 2.4GHz 6-channel with Spektrum DSMX technology
Minimum Speed Control: Two 12A main, one 6A tail
Motor Size: Two 2250Kv, one 4000Kv
Propeller Size: Two 5x3 three blade for main motors, one 2x1.8 four blade for rear motor
Recommended Motor Battery: 3S 800mAh with JST connector required
Servos: Two 5g sub micro analog air servos, three 3.7g sub micro analog air servos
Wing Area: 62 sq in (4 sq dm)
Wingspan: 19.2" (487mm)

You Might Also Like...

You Might Also Like...

Overview

More information about E-Flite V-22 Osprey VTOL BNF Basic Airplane EFL9650

This is the E-Flite V-22 Osprey VTOL Electric Powered Bind-N-Fly VTOL Airplane. The E-flite V-22 Osprey is the scale VTOL (Vertical Take Off and Landing) model you've always wanted. It's an officially-licensed replica of the unique and innovative Bell Boeing tiltrotor aircraft that combines the vertical functionality of a helicopter with the forward flight performance of an airplane. The exclusive flight control system makes it possible to fly in both helicopter/multirotor and airplane flight, and the optimized software makes the transition so simple and predictable that you will feel comfortable and confident even on your first flight. Simply flip the flight mode switch and the V-22 will automatically adjust the tiltrotor positions to transition into forward or hovering flight.

Best of all you can have the V-22 in the air in almost no time at all! The airframe arrives fully-assembled with a factory-installed flight controller, servos, motors and ESCs (plus a Spektrum serial receiver in the BNF Basic version). It's also factory-finished in multicolor paint, and the included decal sheet allows you to customize the finish with multiple military branch trim scheme options. The super-simple transmitter setup only requires assigning one switch for flight mode selection, then you're ready to install a fully charged 3S 11.1V 800mAh LiPo battery (sold separately) to fly. You also have the choice to install the landing gear with a castering nose wheel so you can taxi and perform 'rolling' take offs and landings, or you can leave it off to enjoy the 'retracted' gear look.

The E-flite V-22 Osprey's incredible vertical takeoff and landing capabilities, combined with its compact size and lightweight yet durable composite-reinforced EPO airframe, makes it possible to fly in places and spaces many other RC models can't. And no matter where you fly it, the V-22 delivers a scale VTOL flying experience that's unlike any other- and is a proud tribute to the groundbreaking original.

Includes:
1x E-flite V-22 Osprey VTOL
3x Brushless ESCs (installed)
3x Brushless Outrunner Motors (installed)
5x Sub-Micro Servos (installed)
1x Spektrum 4648 DSMX Serial Receiver with Diversity (installed)
1x Flight Controller (installed)
1x Decal Sheet
1x Set of Spare Main Props
1x Product Manual

Requires:
Full-range 6+ channel DSMX/DSM2 transmitter
3S 11.1V 800mAh 30C LiPo with JST Connector
Compatible LiPo charger

  • The scale VTOL (Vertical Take Off and Landing) capable model you've always wanted
  • Officially-licensed replica of the unique and innovative Bell Boeing V-22 Osprey tiltrotor aircraft
  • Combines the vertical functionality of a helicopter with the forward flight performance of an airplane
  • Compact size so it can be flown in more places and smaller spaces, including indoors
  • The exclusive and expertly tuned flight control system makes it all possible
  • Automatic transition between helicopter/multirotor and airplane flight
  • Stability and Acro flight modes deliver a wide range of performance
  • Super-simple transmitter setup- no complex programming required
  • Spektrum serial receiver with industry-leading DSMX technology
  • Powerful brushless motors compatible with 3S 800mAh batteries
  • Factory-installed flight controller, servos and power systems
  • Included decal sheet offers multiple trim scheme options
  • Lightweight and extremely durable EPO airframe
  • Factory-finished and no assembly required
  • FPV-ready (recommended camera and video transmitter sold separately)

Aileron: Dual servo control
Approximate Assembly Time: Less than 1 Hour
Approximate Flight Time: 4 minutes
CG (Center of Gravity): 0.98 - 1.2" (25 - 30mm) from the leading edge of the wing root
Charger: 3S LiPo compatible required
Completion Level: Bind-N-Fly Basic
Flying Weight: 14.75oz (418g)
Landing Gear: Wire nose gear and main gear foam wheels
Length: 19.2" (487mm)
Material: EPO foam
Minimum Required Radio: Full range 2.4GHz 6-channel with Spektrum DSMX technology
Minimum Speed Control: Two 12A main, one 6A tail
Motor Size: Two 2250Kv, one 4000Kv
Propeller Size: Two 5x3 three blade for main motors, one 2x1.8 four blade for rear motor
Recommended Motor Battery: 3S 800mAh with JST connector required
Servos: Two 5g sub micro analog air servos, three 3.7g sub micro analog air servos
Wing Area: 62 sq in (4 sq dm)
Wingspan: 19.2" (487mm)

Product Videos

Product Questions