E-Flite 10-Amp Pro Brushless ESC EFLA1010

This is the E-Flite 10-Amp Pro Brushless ESC.

Features:

• Up to 10-amp continuous current with proper air flow
• Programmable motor braking
• Safe power-arm mode prevents accidental starts
• Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
• Programmable throttle input range (1.1ms–1.9ms or Auto Select)
• Auto motor shutdown if signal is lost or there is interference
• Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
• Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
• Soft start

Specs:

Brake: Yes - programmable
Continuous Maximum Current: 10A
Input Connector Types: 20AWG with JST connector
Output Connector Types: 20AWG with 2mm female gold bullet connectors
Momentary Peak Current: 12A (15 sec)
Length: 1.2 in (30mm)
Width: 0.7 in (17.5mm)
Height: 0.4 in (10mm)
Weight: 0.35 oz (10 g)
Cells with BEC: 2—3S Li-Po or 6—10 Ni-MH/Ni-Cd

This product was added to our catalog on December 5, 2007