This is the E-Flite 280 Brushless Outrunner Motor 1800Kv.
Features:
- Ideal for 3D models 4–6 oz (115–170 g) and sport and scale models 6–12 oz (170–340 g)
- Up to 55 watts
- Designed for firewall mount or carbon tube mount
- Integrated prop saver design
- Extremely quiet and lightweight—just .5 ounces (14 grams)
- Upgraded performance motor for indoor IPS and 180 motors
- High-torque, direct-drive alternative to inrunners
- Includes mount, mounting hardware and 2mm gold BL connectors
- High-quality construction with ball bearings and hardened steel shaft
- Great lightweight outrunner for small indoor foamies
You Will Need:
- 6–10A brushless ESC
- 2S Li-Po or 5- to 7-cell Ni-Cd/Ni-MH
- 5.5 x 4.5–8 x 6 Slow Flyer prop
Specs:
Type: Brushless outrunner
Size: Upgrade for 180-size
Bearings or Bushings: Two 2 x 5 x 2.5mm Bearings
Recommended Prop Range: 5.5 x 4.5—8 x 6 Slow Flyer
Voltage: 6—8.4V
RPM/Volt (Kv): 2200
Resistance (Ri): .25 ohms
Idle Current (Io): .45A
Continuous Current: 7A
Maximum Burst Current: 8A (15 sec)
Cells: 6 Ni-MH/Ni-Cd or 2 Li-Po
Speed Control: 6A—10A brushless
Weight: 14 g (0.5 oz)
Overall Diameter: 22mm (.85 in)
Shaft Diameter: 2mm
Overall Length: 23mm (.90 in)
Tech Notes:
- Maximum operating temperature: 220 degrees Fahrenheit.
- Adequate cooling is required for all motor operation at maximum current levels.
- Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.
This product was added to our catalog on December 5, 2007
