This is the E-Flite Park 370 Brushless Outrunner Motor 1200Kv with 4mm Hollow Shaft.
Features:
- Ideal for models requiring up to 120 watts of power
- Optimized windings for 3D performance
- High-torque, direct-drive alternative to inrunner brushless motors
- Includes mount, prop adapters and mounting hardware
- 4mm hollow shaft is easily reversed for alternative motor installations
- Excellent motor for small 3D airplanes 7–14 oz (200–400 g)
- Extremely lightweight—just 1.6 ounces
- Ideal for variable pitch props such as the E-Flite Showstopper Variable Pitch Prop System
- External rotor design for better cooling
- High-quality construction with ball bearings
You Will Need:
- 12–20A brushless ESC
- 2–3S Li-Po or 6–10 Ni-Cd/Ni-MH
- 8x3.8–10x4.7 Slow Flyer Prop
- Variable Pitch Prop option
Specs:
Type: Brushless outrunner
Size: Park 370
Bearings or Bushings: One 4 x 8 x 4mm Bearing, and One 4 x 9 x 4mm Bearing
Recommended Prop Range: 8x3.8—10x4.7 or Variable Pitch systems
Voltage: 7.2—12V
RPM/Volt (Kv): 1200
Resistance (Ri): .18 ohms
Idle Current (Io): .60A
Continuous Current: 10A
Maximum Burst Current: 12A (15 sec)
Cells: 6—10 Ni-MH/Ni-Cd or 2—3S Li-Po
Speed Control: 12—20A Brushless
Weight: 45 g (1.6 oz)
Overall Diameter: 28mm (1.10 in)
Shaft Diameter: 4mm (.16 in) hollow
Overall Length: 25mm (1.00 in)
Tech Notes:
- Maximum operating temperature: 220 degrees Fahrenheit.
- Adequate cooling is required for all motor operation at maximum current levels.
- Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.
This product was added to our catalog on January 27, 2021
