E-Flite Park 480 Outrunner Motor Brushless 910Kv EFLM1500

This is the E-Flite Park 480 Brushless Outrunner Motor 910Kv.

Features:

• Perfect match for 3D park flyers weighing 20–30 oz (565–850 g)
• Ideal for scale park flyers 25–35 oz (710–990 g)
• Ideal for models requiring up to 250 watts of power
• High-torque, direct-drive alternative to inrunner brushless motors
• Includes mount, prop adapters and mounting hardware
• External rotor design, 4mm shaft can easily be reversed for alternative motor installations
• Slotted 12-pole outrunner design
• Quiet, lightweight operation
• High-quality construction with ball bearings and hardened steel shaft

You Will Need:

• 20A–35A brushless ESC
• 2S–3S Li-Po or 6- to 10-cell Ni-MH/Ni-CD
• 10x7–12x6 propeller

Specs:

Type: Brushless outrunner
Size: Park flyer
Bearings or Bushings: One 4 x 9 x 4mm Bearing, and One 4 x 10 x 4mm Bearing
Wire Gauge: 16
Recommended Prop Range: 10x7 to 12x6
Voltage: 7.2 to 12
RPM/Volt (Kv): 910
Resistance (Ri): .08 ohms
Idle Current (Io): .85A @8V
Continuous Current: 20A
Maximum Burst Current: 25A (15 sec)
Cells: 6—10 Ni-Cd/Ni-MH or 2—3S Li-Po
Speed Control: 20—35A brushless
Weight: 87 g (3.1 oz)
Overall Diameter: 35mm (1.40 in)
Shaft Diameter: 4mm (.16 in)
Overall Length: 33mm (1.30 in)

Tech Notes:

• This motor is more ideal for the Gen II Thunder Power cells.
• The 1020Kv version is more ideal for the Thunder Power Pro-Lite cells (ending in PL).
• Maximum operating temperature: 220 degrees Fahrenheit.
• Adequate cooling is required for all motor operation at maximum current levels.
• Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.

This product was added to our catalog on December 5, 2007