E-Flite Park180 Outrunner Motor Brushless 2200Kv EFLM1120

This is the E-Flite Park180 Brushless Outrunner Motor 2200Kv.

Features:

• Ideal for 3D models weighing 2–3 oz (55–85 g) and sport and scale models weighing 3–6 oz (85–170 g)
• Ideal for indoor and outdoor small aerobatic park flyers
• Extremely quiet and lightweight—just .3 oz (8.5 g)
• High-torque, direct-drive alternative to inrunner brushless motors
• Designed for firewall mount or carbon tube mount
• 4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
• Up to 30 watts
• Includes prop adapter
• Includes mount, mounting hardware and 2mm gold BL connectors
• Upgraded performance for indoor motors
• High-quality construction with ball bearings and hardened steel shaft

You Will Need:

• 4-6A Brushless ESC
• 2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH
• 3x3 Direct Drive Prop

Specs:

Type: Brushless outrunner
Size: 180
Bearings or Bushings: Two 1.5 x 4 x 2mm Bearings
Recommended Prop Range: 3x3 to 6x3 ‘Direct Drive’ for 2S or 4x4 or 4.5x3 for 3S
Voltage: 4.8—11.4V
RPM/Volt (Kv): 2200
Resistance (Ri): .91 ohms
Idle Current (Io): .30A @ 8V
Continuous Current: 2.6A
Maximum Burst Current: 3.2A (15 sec)
Cells: 2—3S Li-Po or 4—8 Ni-Cd/Ni-MH
Speed Control: 4—6A brushless
Weight: 8.5 g (.30 oz)
Overall Diameter: 16mm (.63 in)
Shaft Diameter: 1.5mm
Overall Length: 20mm (.80 in)

Tech Notes:

• Maximum operating temperature: 220 degrees Fahrenheit
• Adequate cooling is required for all motor operation at maximum current levels.
• Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.

This product was added to our catalog on December 5, 2007