RB Products S3 II L2G Engine Combo RBD01006S3II

RB Products

Item # RBD01006S3II
Status: In Stock
Engine Size:
.16 & UP - CAR
RB Products S3 II L2G Engine Combo RBD01006S3II

More information about RB Products S3 II L2G Engine Combo RBD01006S3II

This is the RB Products RB Concept S3 II L2G Buggy Engine Combo.

  • Eleven fin orange colored aluminum cooling head
  • Ideal for club racers and beginners wanting great fuel economy at a reasonable price
  • Aluminum connecting rod, grooved for better lubrication and reliability
  • Double rubber shielded front bearing keeps out dust and moisture
  • ABC cylinder & piston set, Aluminum piston,Brass cylinder liner, that is Chrome plated
  • Nylon body slide valve carburetor with 8mm intake diameter

One RB Concept S3 II L2G Buggy Engine. CP-02 Std #6 glow plug, slide valve carburetor, exhaust gasket and instructions

Fuel: Car blend with 10%-25% nitro content
Tuned Pipe and Manifold depending on vehicle, RB Concepts recommends their 2045 Tuned Pipe Kit, RBDG1240
Glow plug wrench and track equipment
Displacement: 0.21cu in (3.49cc)
Bore: 16.42mm
Stroke: 16.42mm
Intake Ports: 3 bypass
Exhaust Ports: 1
Crankshaft: 13mm
Carburetor Intake Diameter: 8mm
Carburetor Settings: Main Needle, 3.5 turns from closed Idle Needle, 5 turns from closed
Weight: 12.9oz (368g)
Distance from Backplate to end of Crankshaft: 3.7" (94mm)
Height from Mounting Tab to top of Cylinder Head: 3.4" (86.2)
Center of Mounting Holes Same Side: 0.83" (21mm)
Center of Mounting Holes Opposite Side: 1.5" (37.5mm)
Mounting Hole Diameter: 0.12" (3.2mm)
Distance from Front Bearing to End of Crankshaft: 1.2" (29.5mm)
Width of Crankcase Below Mounting Tabs: 1.3" (32.5mm)
Width at Mounting Tabs: 1.8" (45mm)
Distance/Bottom of Crankcase to Crankshaft Center: 0.61" (15.5mm)
Distance/Exhaust Port Center to Crankshaft Center: 1.2" (30mm)
Diameter of Cooling Head: 2.3" (59.2mm)