Blue anodized aluminum manifold, tuned pipe and pressure fitting.
Header wraps around the back of the engine, angling downward at 30 degrees, and levels off straight. This would point the tuned pipe toward the front of the model.
Allows the engine to have strong power across mid & upper RPM range.
This package includes:
One Header (manifold)
One Tuned Pipe w/ 90 degree pressure fitting installed
One White Silicone Coupler
Two Black Tie Straps (for the coupler)
One piece of blue standard size Fuel Tubing (for fuel tank pressure)
One Exhaust Gasket
Two 3 x 23mm cap head Screws (for mounting header to engine)
Two 3mm lock Washers (for mounting header to engine)
One 3 Mounting Wire (for securing pipe to the chassis)
One 4 x 4mm Set Screw (for securing wire to the pipe)
One 3 x 10mm flat head Screw (for securing pipe to the chassis)
One 3mm nylon Nut (for securing pipe to the chassis)
Assembling onto a .12 to .15 size engine and chassis.
2mm and 2.5mm hex driver and 5.5mm nut driver.