Hobbico Accu-Glo II Power Panel HCAP0306


Item # HCAP0306
$49.99 $29.99
(You save $20.00)
Status: In Stock
Hobbico Accu-Glo II Power Panel HCAP0306

More information about Hobbico Accu-Glo II Power Panel HCAP0306

This is the Hobbico Accu-Glo II power panel. This panel powers starters, chargers, fuel pumps, and glow starters and monitors condition of glow plugs. This Power Panel comes with a hard-plastic case or can be mounted to any field box with a standard sized cutout for a power panel.


  • One Hobbico Accu-Glo II power panel with two alligator clips
  • Two black and two red banana plugs
  • Two plastic plug covers
  • Four M3x10 self-tapping screws to mount panel to field box

Requires: 12V battery

  • Fuel pump switch from original Accu-Glo was replaced by separate color-coded push-buttons for "FILL" and "EMPTY." Press once to Start, again to Stop
  • Four LEDs, 11V, 11.5V, 12V, and 12.5V indicate field battery condition-an improvement from one light that glowed either Green or Red on original version
  • Glow starter charger keeps unit fully charged at a constant 300-400mA rate
  • Automatic glow power management section tells when glow plug is fully charged and if plug continuity is good
  • Adjustment dial allows automatic glow heat customization to the model; once set the unit maintains proper heat regardless of glow plug's condition

Input Voltage: 11-13V DC

Input Voltage Indicators: Four LEDs

Starter Jacks-Output Voltage: 12V DC

Fuel Pump Controls: Yellow "FILL" pushbutton; Red "EMPTY" pushbutton

Glow Heat Power Circuit: Automatic heat adjustment

Glow Heat Status Indicators: "HOT" and "COLD" LEDs

Glow Heat Continuity Indicators: "GOOD" and "BAD" LEDs

Glow Starter Charger Current: 300-400mA constant current (not timed)

Glow Starter Output Jack: Glow driver mounting lug with LED

Fuse: 7.5A spade type

Weight: 8.3oz (235g)

Dimensions: 6" x 3.7" (152 x 94mm)