Menu

FMS T-28D V4 PNP Red 1400mm FMM083PRED

FMS

https://www.rcplanet.com/fms-t-28d-v4-pnp-red-1400mm-fmm083pred/
$379.99 $329.99
(You save $50.00)
Status: In Stock
Availability: USUALLY SHIPS WITHIN 24 HOURS
(No reviews yet)
UPC:
635414724459
Availability:
USUALLY SHIPS WITHIN 24 HOURS
FMS T-28D V4 PNP Red 1400mm FMM083PRED
FMS T-28D V4 PNP Red 1400mm FMM083PRED
FMS T-28D V4 PNP Red 1400mm FMM083PRED
FMS T-28D V4 PNP Red 1400mm FMM083PRED
FMS T-28D V4 PNP Red 1400mm FMM083PRED
FMS T-28D V4 PNP Red 1400mm FMM083PRED
FMS T-28D V4 PNP Red 1400mm FMM083PRED

Item # FMM083PRED

Vehicle Type:
Airplane
Build Type:
RX-TX Ready
Power Type:
Electric Power
Skill Level:
Skill Level 3
More information about FMS T-28D V4 PNP Red 1400mm FMM083PRED

This is an FMS T-28D Tojan V4 1400mm PNP Airplane. No matter whether you had an FMS T28 before, the new V4 is full of surprises. First of all, the foam ratio has been upgraded from EPO 40 to the lighter and larger EPO 52, which alleviates the airplanes weight, without weakening the airplane. Moreover, the original oil paint which has an unavoidable negative side effect of corrosion has been replaced by the latest environmental water-based paint.

The latest FMS multi-connector is used in the V4, which makes the assembly easy and simple while leaving the wires orderly and user- friendly. The 1400mm T28 V4 adopts the new design of ball linkage to remove the play for a more accurate flight. The updated 4258 kv650 motor increases the power and speed around 30% higher than the previous V3 version, plus the new power system can work with 4S, 5S, and 6S batteries to satisfy different customer requirements. Both front and rear landing gears are now metal, with a shock absorption function for hard landings.

Features:

  • Shock absorbing metal oleo struts covered with scale plastic parts for looks
  • Glueless wing "Servo Pockets" (servos in the wing are screwed in as opposed to glued for easier replacement)
  • Upgraded (larger) 4258-650KV motor with Japanese ball bearings and magnets
  • Pre-installed ball links on push rods as opposed to the old clevis-control horn setup
  • FMS multi-connector system for cleaner wiring and easy wing removal
  • FMS removed the functional cowl flaps. While technically a downgrade, there are two less servos to worry about
  • Detailed cockpit with pilot figure
  • Bright LED navigation lights
  • Scale details like chrome spinner and landing gear doors
  • Made of durable EPO foam

Includes:
1x T-28D Tojan V4 PNP, 1400mm
1x User Manual

Requires:
6+ Channel Radio System
Lipo Battery
LiPo Charger

Approximate Assembly Time: 1-3 Hours
Approximate Flight Time: 6 minutes
Battery: LiPo 14.8V 2600mAh 25C
CG (Center of Gravity): 3.1-3.3 in (80-85mm) from leading edge
Completion Level: Plug-N-Play
Elevator: Yes
Flaps: Yes
Flying Weight: Approximately 86.4 oz (2450g)
Length: 46.7 in (1185mm)
Material: Durable EPO 52
Minimum Required Radio: 6 Channel
Motor Size: 4258 KV650 motor
Propeller Size: 13x9, 3-blade propeller
Retracts: Yes
Rudder: Yes
Servos: (2) 9g Digital Metal Gear Servos, (5) 17g Digital Metal Gear Servos
Speed Control: 70A Brushless ESC with 5A SBEC
Wing Area: 33.4 sq dm
Wing Loading: 73.3g/sq dm
Wingspan: 55.1 in (1400mm)
You Might Also Like...

Related Items

You Might Also Like...

Overview

More information about FMS T-28D V4 PNP Red 1400mm FMM083PRED

This is an FMS T-28D Tojan V4 1400mm PNP Airplane. No matter whether you had an FMS T28 before, the new V4 is full of surprises. First of all, the foam ratio has been upgraded from EPO 40 to the lighter and larger EPO 52, which alleviates the airplanes weight, without weakening the airplane. Moreover, the original oil paint which has an unavoidable negative side effect of corrosion has been replaced by the latest environmental water-based paint.

The latest FMS multi-connector is used in the V4, which makes the assembly easy and simple while leaving the wires orderly and user- friendly. The 1400mm T28 V4 adopts the new design of ball linkage to remove the play for a more accurate flight. The updated 4258 kv650 motor increases the power and speed around 30% higher than the previous V3 version, plus the new power system can work with 4S, 5S, and 6S batteries to satisfy different customer requirements. Both front and rear landing gears are now metal, with a shock absorption function for hard landings.

Features:

  • Shock absorbing metal oleo struts covered with scale plastic parts for looks
  • Glueless wing "Servo Pockets" (servos in the wing are screwed in as opposed to glued for easier replacement)
  • Upgraded (larger) 4258-650KV motor with Japanese ball bearings and magnets
  • Pre-installed ball links on push rods as opposed to the old clevis-control horn setup
  • FMS multi-connector system for cleaner wiring and easy wing removal
  • FMS removed the functional cowl flaps. While technically a downgrade, there are two less servos to worry about
  • Detailed cockpit with pilot figure
  • Bright LED navigation lights
  • Scale details like chrome spinner and landing gear doors
  • Made of durable EPO foam

Includes:
1x T-28D Tojan V4 PNP, 1400mm
1x User Manual

Requires:
6+ Channel Radio System
Lipo Battery
LiPo Charger

Approximate Assembly Time: 1-3 Hours
Approximate Flight Time: 6 minutes
Battery: LiPo 14.8V 2600mAh 25C
CG (Center of Gravity): 3.1-3.3 in (80-85mm) from leading edge
Completion Level: Plug-N-Play
Elevator: Yes
Flaps: Yes
Flying Weight: Approximately 86.4 oz (2450g)
Length: 46.7 in (1185mm)
Material: Durable EPO 52
Minimum Required Radio: 6 Channel
Motor Size: 4258 KV650 motor
Propeller Size: 13x9, 3-blade propeller
Retracts: Yes
Rudder: Yes
Servos: (2) 9g Digital Metal Gear Servos, (5) 17g Digital Metal Gear Servos
Speed Control: 70A Brushless ESC with 5A SBEC
Wing Area: 33.4 sq dm
Wing Loading: 73.3g/sq dm
Wingspan: 55.1 in (1400mm)

Product Questions