Spektrum Water Resistant 25mw 5.8GHz vtx and Camera SPMVA2510

Spektrum

https://www.rcplanet.com/fpv-cameras/fpv-cameras/spektrum-water-resistant-25mw-5-8ghz-vtx-and-camera-spmva2510/
$129.99 $49.99
(You save $80.00)
Status: In Stock
(No reviews yet)
UPC:
605482614334
Availability:
<span style="color: #D70200;"><strong>Unavailable</strong></span><br /><span style="color: #D70200;"><strong>Sandy, Utah</strong></span>

Item # SPMVA2510

More information about Spektrum Water Resistant 25mw 5.8GHz vtx and Camera SPMVA2510

This is the Spektrum Water Resistant 25mw 5.8GHz VTX and Camera with Raceband. The VA2510 FPV camera was built with the needs of quad racers and surface vehicles in mind. In order to compensate for constant shock and exposure to the elements, the camera and 25mW, 5.8GHz transmitter are contained in a protective shell barely larger than a thimble.

The VA2510 FPV is capable of being powered separately or through the model's receiver. When powering through an auxiliary channel on your receiver, all of the power passes through an integrated power filter to avert any interference from any connected motors and servos. You are also able to assign a transmitter switch or dial to whatever aux channel the camera is connected to and switch between video frequencies remotely.

The VA2510 is compatible with all 5.8GHz Fat Shark headsets and is easily installed. A HAM license is required to operate the VA2510 in the U.S.

Requires:

  • Open Port on Receiver or Y-Harness
  • 5.8GHz FPV Headset or Monitor
  • 3.9-6.0 Volt Power Source if powering separately


Note
: A HAM license is required to operate the VA2510 in the U.S. If you fail to obtain a license before use you risk a maximum of $10,000 for a single violation or day, up to a total maximum amount of $75,000, as well as potential criminal penalties.

  • Integrated camera and 25mw transmitter
  • Protective outer shell for extreme durability
  • Water, shock and dust resistant
  • Excellent image clarity in all lighting conditions
  • Enough signal range for small park flyers and quad racers
  • Compatible with 5.8GHz Fat Shark headsets
  • Requires 2S or 3S LiPo battery, sold separately
  • Powered separately or through modeler's receiver
  • Remote channel selection available when powered through receiver aux port
  • Integrated power filter prevents motor and servo interference
  • No 2.4GHz RC interference
  • Installs in seconds

Frequency Band: 5.8GHz
Modulation: Analog NTSC
Input Power: 3.9v - 6.0v
Signal Output: 25mw

You Might Also Like...

You Might Also Like...

Overview

More information about Spektrum Water Resistant 25mw 5.8GHz vtx and Camera SPMVA2510

This is the Spektrum Water Resistant 25mw 5.8GHz VTX and Camera with Raceband. The VA2510 FPV camera was built with the needs of quad racers and surface vehicles in mind. In order to compensate for constant shock and exposure to the elements, the camera and 25mW, 5.8GHz transmitter are contained in a protective shell barely larger than a thimble.

The VA2510 FPV is capable of being powered separately or through the model's receiver. When powering through an auxiliary channel on your receiver, all of the power passes through an integrated power filter to avert any interference from any connected motors and servos. You are also able to assign a transmitter switch or dial to whatever aux channel the camera is connected to and switch between video frequencies remotely.

The VA2510 is compatible with all 5.8GHz Fat Shark headsets and is easily installed. A HAM license is required to operate the VA2510 in the U.S.

Requires:

  • Open Port on Receiver or Y-Harness
  • 5.8GHz FPV Headset or Monitor
  • 3.9-6.0 Volt Power Source if powering separately


Note
: A HAM license is required to operate the VA2510 in the U.S. If you fail to obtain a license before use you risk a maximum of $10,000 for a single violation or day, up to a total maximum amount of $75,000, as well as potential criminal penalties.

  • Integrated camera and 25mw transmitter
  • Protective outer shell for extreme durability
  • Water, shock and dust resistant
  • Excellent image clarity in all lighting conditions
  • Enough signal range for small park flyers and quad racers
  • Compatible with 5.8GHz Fat Shark headsets
  • Requires 2S or 3S LiPo battery, sold separately
  • Powered separately or through modeler's receiver
  • Remote channel selection available when powered through receiver aux port
  • Integrated power filter prevents motor and servo interference
  • No 2.4GHz RC interference
  • Installs in seconds

Frequency Band: 5.8GHz
Modulation: Analog NTSC
Input Power: 3.9v - 6.0v
Signal Output: 25mw

Product Questions