Futaba 12KH with R3001SB FPV Telemetry TFHSS/SFHSS FUT01004345-3

Futaba

https://www.rcplanet.com/futaba-12kh-with-r3001sb-fpv-telemetry-tfhss-sfhss-futk9283/
$529.99
Status: Out of stock
(No reviews yet)
UPC:
4513886207853

Item # FUT01004345-3

Radio Channel:
12-Channel
More information about Futaba 12KH with R3001SB FPV Telemetry TFHSS/SFHSS FUT01004345-3

This is the Futaba12KH 2.4GHz T-FHSS S.Bus214 channel computer radio system with the R3001SB receiver. This is the racing drone multicopter receiver.

Includes:

  • 12K 14-channel transmitter
  • R3001SB
  • HT5F11800B 6V 1800mAh NiMH transmitter battery
  • Charger
  • On/Off switch
  • Instruction manual

Requires: Servos of modeler's choice

  • 14 channels (12 proportional, 2 switched)
  • Compatible with T-FHSS and S-FHSS protocols, transmits and receives telemetry data via the T-FHSS protocol, Futaba telemetry sensors are required (sold separately)
  • Six 3-position switches, two 2-position switches, two slider levers, two rotary dials, four digital trims and two push buttons
  • S.Bus2 system allows multiple servos, gyros and more to be set up with fewer cables
  • Large, backlit LCD screen with adjustable contrast
  • Micro memory card slot for storing model info and free system updates
  • Expandable 30-model memory, 10-character model naming
  • 5 flight conditions, 5 customizable programmable mixes
  • Vibration feature alerts pilots to various alarms and timers in addition to sound

Airplane Features

  • 6 Wing Types, 3 Tail Wing Types, 5 Flight Modes
  • Pitch Curve and Throttle Curve
  • Throttle Delay
  • Aileron Differential
  • Flap Setting
  • Aileron to Camber Flaps
  • Aileron to Brake Flaps
  • Aileron to Rudder
  • Rudder to Aileron
  • Camber Mix
  • Elevator to Camber
  • Camber Flap to Elevator
  • Butterfly Function
  • Trim Mix
  • Air Brake
  • Gyro Mix
  • V-Tail
  • Ailevator (dual elevator)
  • Winglet
  • Motor Speed
  • Rudder to Elevator
  • Snap Roll
  • Multi-engine Functionality
  • Airbrake

Helicopter Features

  • 6 Swash Types
  • Pitch Curve and Pitch Trim
  • Throttle Curve and Throttle Hover Trim
  • Throttle Hold
  • Swash Ring
  • Pitch to Needle
  • Pitch to Rudder (revolution mixing)
  • Gyro Mixing
  • Governor Mixing
  • Timer settings
  • Throttle percent timer

Glider Features

  • Glider-specific functions
  • 6 Wing Types, 3 Tail Wing Types

Multirotor Features

  • Throttle stick position warning
  • Gyro Sense
  • Flight Mode
  • Throttle Curve, Throttle Delay

R3008SB Receiver

  • T-FHSS protocol
  • Dual Antenna Diversity
  • S.Bus/S.Bus2 ports (S.Bus2 port for bidirectional telemetry sensors)
  • 8-channel PWM conventional ports
  • High voltage
  • Battery fail-safe

12K Transmitter
Frequency Band: 2.4GHz
RF Power Output: 100mW EIRP
System: T-FHSS Air, S-FHSS switchable
Power Supply: 6.0V HT5F1800B

R3008SB Receiver
Dimensions: 0.83 x 1.65 x 0.21" (21.1 x 41.8 x 5.3mm)
Weight: 0.15oz (4.2g)
Power Requirement: 4.8-7.4V Battery F/S

You Might Also Like...

You Might Also Like...

Overview

More information about Futaba 12KH with R3001SB FPV Telemetry TFHSS/SFHSS FUT01004345-3

This is the Futaba12KH 2.4GHz T-FHSS S.Bus214 channel computer radio system with the R3001SB receiver. This is the racing drone multicopter receiver.

Includes:

  • 12K 14-channel transmitter
  • R3001SB
  • HT5F11800B 6V 1800mAh NiMH transmitter battery
  • Charger
  • On/Off switch
  • Instruction manual

Requires: Servos of modeler's choice

  • 14 channels (12 proportional, 2 switched)
  • Compatible with T-FHSS and S-FHSS protocols, transmits and receives telemetry data via the T-FHSS protocol, Futaba telemetry sensors are required (sold separately)
  • Six 3-position switches, two 2-position switches, two slider levers, two rotary dials, four digital trims and two push buttons
  • S.Bus2 system allows multiple servos, gyros and more to be set up with fewer cables
  • Large, backlit LCD screen with adjustable contrast
  • Micro memory card slot for storing model info and free system updates
  • Expandable 30-model memory, 10-character model naming
  • 5 flight conditions, 5 customizable programmable mixes
  • Vibration feature alerts pilots to various alarms and timers in addition to sound

Airplane Features

  • 6 Wing Types, 3 Tail Wing Types, 5 Flight Modes
  • Pitch Curve and Throttle Curve
  • Throttle Delay
  • Aileron Differential
  • Flap Setting
  • Aileron to Camber Flaps
  • Aileron to Brake Flaps
  • Aileron to Rudder
  • Rudder to Aileron
  • Camber Mix
  • Elevator to Camber
  • Camber Flap to Elevator
  • Butterfly Function
  • Trim Mix
  • Air Brake
  • Gyro Mix
  • V-Tail
  • Ailevator (dual elevator)
  • Winglet
  • Motor Speed
  • Rudder to Elevator
  • Snap Roll
  • Multi-engine Functionality
  • Airbrake

Helicopter Features

  • 6 Swash Types
  • Pitch Curve and Pitch Trim
  • Throttle Curve and Throttle Hover Trim
  • Throttle Hold
  • Swash Ring
  • Pitch to Needle
  • Pitch to Rudder (revolution mixing)
  • Gyro Mixing
  • Governor Mixing
  • Timer settings
  • Throttle percent timer

Glider Features

  • Glider-specific functions
  • 6 Wing Types, 3 Tail Wing Types

Multirotor Features

  • Throttle stick position warning
  • Gyro Sense
  • Flight Mode
  • Throttle Curve, Throttle Delay

R3008SB Receiver

  • T-FHSS protocol
  • Dual Antenna Diversity
  • S.Bus/S.Bus2 ports (S.Bus2 port for bidirectional telemetry sensors)
  • 8-channel PWM conventional ports
  • High voltage
  • Battery fail-safe

12K Transmitter
Frequency Band: 2.4GHz
RF Power Output: 100mW EIRP
System: T-FHSS Air, S-FHSS switchable
Power Supply: 6.0V HT5F1800B

R3008SB Receiver
Dimensions: 0.83 x 1.65 x 0.21" (21.1 x 41.8 x 5.3mm)
Weight: 0.15oz (4.2g)
Power Requirement: 4.8-7.4V Battery F/S

Product Questions