Hobbywing XRotor 40A Micro ESC (3-6S) HWI30901015

Hobbywing

https://www.rcplanet.com/hobbywing-xrotor-40a-micro-esc-3-6s-hwi30901015/
$19.49
Status: In Stock
(No reviews yet)
UPC:
088718514705

Item # HWI30901015

More information about Hobbywing XRotor 40A Micro ESC (3-6S) HWI30901015

This is a Hobbywing XRotor 40-Amp 3-6S Micro ESC with BLHeli_32 firmware and Dshot1200. High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance. BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S. All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.

The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments. The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multshot (5-25us). Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up. The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.

Specs:
LiPo Power Input: 3-6S
Cont. Current: 40A
Burst Current: 50A
Stick Programming: BLHeliSuite
Firmware: BLHeli_32
Input Wires: 16AWG-100mm
Size: 32.7x18.4x6.2mm
Weight: 11.5g

You Might Also Like...

You Might Also Like...

Overview

More information about Hobbywing XRotor 40A Micro ESC (3-6S) HWI30901015

This is a Hobbywing XRotor 40-Amp 3-6S Micro ESC with BLHeli_32 firmware and Dshot1200. High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance. BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S. All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.

The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments. The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multshot (5-25us). Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up. The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.

Specs:
LiPo Power Input: 3-6S
Cont. Current: 40A
Burst Current: 50A
Stick Programming: BLHeliSuite
Firmware: BLHeli_32
Input Wires: 16AWG-100mm
Size: 32.7x18.4x6.2mm
Weight: 11.5g

Product Questions