Hot Racing Aluminum HD Big Bore Shock (2) 100mm HRATD100X06
This is a pair of Hot Racing CNC machined anodized aluminum 100mm big bore threaded shocks for 1/10 scale off-road vehicles using 100mm shocks.
Warning: Last items in stock!
More information about Hot Racing Aluminum HD Big Bore Shock (2) 100mm HRATD100X06
This is a pair of Hot Racing CNC machined anodized aluminum 100mm big-bore threaded shocks for 1/10 scale off-road vehicles using 100mm shocks. Some applications include, but are not limited to the Associated SC10; HPI Blitz; Kyosho Ultima SC; Traxxas Bandit rear, E-Maxx, Nitro Rustler/Slash/Sport/Stampede rear, Rustler rear, Slash 2WD rear, Slash 4x4 rear, Stampede 2WD rear, Stampede 4x4 rear, T-Maxx; and other similar vehicles
- CNC machined 6061-T6 billet aluminum shock bodies, collars, caps, and spring retainers
- "Big Bore" threaded shock bodies
- CNC machined 11mm Delrin pistons
- 3.5mm stainless steel shock shafts
- Silver and blue anodized aluminum components
- Vented shock caps with bladder seals for consistent rebound dampening
- Threaded shock collars with o-ring to prevent unwanted movement
- Composite plastic lower shock ends with aluminum balls
- Fully assembled, just add shock oil and bleed
Extended Length: 100mm
Compressed Length: 70mm
Overall Length: 110mm
Spring: 1.54mm wire, 13-turn dual rate, 19.3mm OD, 69.5mm long
2x Assembled Shocks
2x M3x20mm Flat Head Cap Screws
2x M3x18mm Button Head Cap Screws
2x 3mm Countersunk Washers
2x 5.9 Hollow Balls
4x 1.5mm Thick Spacers
4x 3mm Thick Spacers
Silicone shock oil of modeler's choice and bleeding per the typical bladder shock bleeding procedure.
Best used with Team Associated shock Green Slime grease or shock o-ring grease when rebuilding lower seal.
Snap ring pliers when rebuilding lower seal.
Use spacers as need for installation
Can be used with optional Hot Racing springs: SLF63FS261 (progressive), SLF63MR268 (linear), SLF63RS286 (progressive)
See Hot Racing TD8100X06 for an eight (8) pack of 100mm shocks
See Hot Racing TD90X06 and TD90PC06 for 90mm shocks
Accepts optional Hot Racing silicone shock boot RDP34201
See Hot Racing RTDS100X for replacement shock shafts and pistons
See Hot Racing RTD910BN for replacement shock ends
See Hot Racing RTD910RB for a rebuilt kit
See Hot Racing RTD1010X for replacement bladders and lower seals
Specifications for Hot Racing Aluminum HD Big Bore Shock (2) 100mm HRATD100X06
Car & Truck Parts
Reviews for Hot Racing Aluminum HD Big Bore Shock (2) 100mm HRATD100X06
No customer reviews for the moment.
Questions and answers about Hot Racing Aluminum HD Big Bore Shock (2) 100mm HRATD100X06
will these fit the rear of the sc10 2wd
These are a great universal shock that will fit the rear of the SC10 along with many other chassis. Then part number HRATD90X06 can be used for the fronts.
Will these fit the rear or a Traxxas ruster
Yes these will fit on the rear of the Traxxas Rustler.