Currently Out of Stock
Warning: Last items in stock!
This is the NX8931 XBUS pro ultra smart servo from JR Radio. Based one the DS8911 and NX8921, the new NX8931 boasts updated firmware, optimized performance and efficiency, as well as a new reinforced top case for increased durability.
Equipped with automatic output detection, the new JR Smart Servos are capable of being used with convention (PWM) or XBus installations for added ease and flexibility. Programming the NX8931 is easy using the XBus-equipped JR XG-series DMSS transmitter. Not only can you adjust servo direction and travel, but you can also fine tune holding power, stopping speed, dead band, starting power, total servo travel, enable slow start, enhanced failsafe features to keep your servos safe in case of signal loss, and you can even create an alarm for if the servo load exceeds a user-set limit.
Whether you're using XBis or not, don't worry. The NX8931 also includes JR's unique automatic output detection, so it is easily used in standard configuration with conventional (PWM) or XBus installations for extra ease and flexibility with just about any brand of equipment.
Bushing Or Bearing: Bearing
Connector Type: Z-Connector
Gear Material: 2 Metal / 2 Plastic
Gear Type: Metal
Height: 1.38 in (35.1mm)
Input Voltage: 4.8-8.5v
Length: 1.59 in (40.38mm)
Servo Type: Digital
Speed: 0.20 (4.8V)/0.16 (6.0V)/0.13 (7.4V)
Spline Count: 15 Teeth
Torque: 319.2 (4.8V)/411.0 (6.0V)/506.8 (7.4V)
Weight: 2.54 oz (72 g)
Width: 0.83 in (21.1mm)
|Main Category||Radio Systems|
|International Shipping Restriction||International Shipping Restriction|
|Free Shipping||Free Shipping|
|In-Store Pickup QTY||0|
No customer reviews for the moment.