Kyosho LAZER ZX7 4WD Racing Buggy Kit KYO30048B

Kyosho

https://www.rcplanet.com/kyosho-lazer-zx7-4wd-racing-buggy-kit-kyo30048b/
$869.99 $519.99
(You save $350.00)
Status: Out of stock
(No reviews yet)

Item # KYO30048B

Build Type:
Ready to Run
Scale:
1/10
Power Type:
Electric Power
Vehicle Type:
Buggy
More information about Kyosho LAZER ZX7 4WD Racing Buggy Kit KYO30048B

This is the Kyosho Lazer ZX7 1/10 Scale Electric Powered 4WD Buggy Kit. Having maintained its brilliant record in major races throughout Japan and around the world with minor improvements since its launch, the LAZER ZX-6 has fully evolved into the new ZX-7. Over this time the racing landscape has changed significantly with many circuits using high-grip carpet and artificial turf. In addition, the power and speed of electric off road cars has increased dramatically. While maintaining the signature mild control and dynamic maneuverability of the ZX-6, the new narrow main chassis design of the ZX-7 provides optimal rigidity and lighter weight while the new front suspension and aero body with rear wing design generates more downforce. These performance improvements go together with the essential elements of reliability and durability as well as a wider range of settings that will give the ZX-7 the leading edge in modern racing.

Includes:
Unassembled chassis kit
Clear body, wing
Hex wrench (1.5, 2, 2.5mm)
Cross wrench
X-GEAR ball high graphite grease, shock springs

Requires:
2ch R/C system , 1 servo, 1 ESC
Motor
Battery and charger for chassis
Tires and inserts
Paint for body
Batteries for transmitter
Tools

  • 2mm shorter front gullwing arms and wider front aluminum arm mounts
  • Caster adjustable front hub carriers 7°, 10°, 13° with revised ackerman knuckles
  • Lower roll center rear upper bulkhead
  • Wide rear aluminum arm mount
  • .5mm thinner 7075 hard anodized aluminum chassis for improved flex
  • Front and rear chassis braces also improving flex characteristics
  • Floating servo mount
  • Lightweight slipper clutch with front and rear gear diffs
  • Wing and screw on mounts from the RB7
  • Adjustable length rear arms from the RB7
  • 1.6mm and 1.7mm 2 hole pistons and shock caps from the RB7
  • 74mm universal swingshafts for the front end

Length: 385mm
Width: 248mm
Height: 145mm
Wheelbase: 278mm
Tread (F/R): 210mm / 200mm
Tires (F/R): Sold separately
Gear Ratio: 2.5:1 (2nd)
Weight: 1,650g (approx.)
Motor: Sold separately

You Might Also Like...

You Might Also Like...

Overview

More information about Kyosho LAZER ZX7 4WD Racing Buggy Kit KYO30048B

This is the Kyosho Lazer ZX7 1/10 Scale Electric Powered 4WD Buggy Kit. Having maintained its brilliant record in major races throughout Japan and around the world with minor improvements since its launch, the LAZER ZX-6 has fully evolved into the new ZX-7. Over this time the racing landscape has changed significantly with many circuits using high-grip carpet and artificial turf. In addition, the power and speed of electric off road cars has increased dramatically. While maintaining the signature mild control and dynamic maneuverability of the ZX-6, the new narrow main chassis design of the ZX-7 provides optimal rigidity and lighter weight while the new front suspension and aero body with rear wing design generates more downforce. These performance improvements go together with the essential elements of reliability and durability as well as a wider range of settings that will give the ZX-7 the leading edge in modern racing.

Includes:
Unassembled chassis kit
Clear body, wing
Hex wrench (1.5, 2, 2.5mm)
Cross wrench
X-GEAR ball high graphite grease, shock springs

Requires:
2ch R/C system , 1 servo, 1 ESC
Motor
Battery and charger for chassis
Tires and inserts
Paint for body
Batteries for transmitter
Tools

  • 2mm shorter front gullwing arms and wider front aluminum arm mounts
  • Caster adjustable front hub carriers 7°, 10°, 13° with revised ackerman knuckles
  • Lower roll center rear upper bulkhead
  • Wide rear aluminum arm mount
  • .5mm thinner 7075 hard anodized aluminum chassis for improved flex
  • Front and rear chassis braces also improving flex characteristics
  • Floating servo mount
  • Lightweight slipper clutch with front and rear gear diffs
  • Wing and screw on mounts from the RB7
  • Adjustable length rear arms from the RB7
  • 1.6mm and 1.7mm 2 hole pistons and shock caps from the RB7
  • 74mm universal swingshafts for the front end

Length: 385mm
Width: 248mm
Height: 145mm
Wheelbase: 278mm
Tread (F/R): 210mm / 200mm
Tires (F/R): Sold separately
Gear Ratio: 2.5:1 (2nd)
Weight: 1,650g (approx.)
Motor: Sold separately

Product Questions