Losi Super Baja Rey 1/6 4WD DT Bind & Drive LOS05018

Losi

https://www.rcplanet.com/losi-super-baja-rey-1-6-4wd-dt-bind-drive-los05018/
$849.99 $749.99
(You save $100.00)
Status: In Stock
(No reviews yet)
UPC:
605482000000

Item # LOS05018

Build Type:
Almost Ready to Run
Power Type:
Electric Power
Scale:
1/6
Vehicle Type:
Truck
More information about Losi Super Baja Rey 1/6 4WD DT Bind & Drive LOS05018

This is the Losi Super Baja Rey 1/6 Scale Electric Powered Bind & Drive 4WD Desert Truck with AVC Precision Control. Get ready to have your mind blown with the 1/6th scale Losi Super Baja Rey desert truck! This beast is setting new standards with its scale detail and adrenaline-pumping 50+ mph speeds. If you're craving the realistic handling characteristics like the big boys, the long travel solid 4-link rear axle and independent front A-Arm suspension will not disappoint. Top it off with an authentic four piece body, full bodied roll cage, plus driver figures and this truck looks as wicked as it performs. Combine that with the precision control of Spektrum DSMR reliability integrated with locked-in AVC technology and you can SEND IT with confidence!

The foundation of the Super Baja Rey consists of a 4mm, hard-anodized aluminum chassis plate with a 4mm upper deck. For added durability and performance it's integrated with a realistic roll cage made of super-tough composite material. Whether you are hitting the whoops, getting huge air, or just wide open, the 4mm chassis just keeps asking for more! Just like the 1:1 desert trucks, the Super Baja Rey truck comes with a super-rigid roll cage made of super-tough composite material that enhances the truck's scale looks and durability. It is integrated with the 4mm hard-anodized aluminum chassis plate providing the ultimate protection for your truck and electronics.

The vehicle comes equipped with a Dynamite Fuze 1200Kv brushless motor and waterproof 160A ESC. This potent combination can handle 6-cells of LiPo power and will allow you to hurtle across the landscape at speeds of up to 50+ mph. With the SRS6000 receiver, drivers get the stability control of AVC (Active Vehicle Control) technology. The SRS6000 features six channels of control outputs, which makes it a great choice for vehicles that need controls for shift servos, dual motors, dual steering, and more, all while being able to take advantage of AVC technology. It also benefits from steering priority, giving you the ability to adjust how much stability you want in those tight turns.

Includes:
1x Losi Super Baja Rey BND with AVC Technology: 1/6-Scale 4WD Desert Truck
1x Spektrum 6-Channel DSMR AVC2 Surface Receiver (installed)
1x Spektrum 18KG Waterproof 1/5-Scale Servo (installed)
1x Dynamite Fuze 160A BL WP 1/5-Scale ESC: 8S (installed)
1x Dynamite Fuze Brushless Motor 1200Kv (installed)
1x Product Manual

Requires:
DSMR compatible, 4+ channel, surface transmitter
Two 2 or 3 cell, 5000+ mAh 50C LiPo battery with EC5 connector
Compatible LiPo charger

  • Realistic desert truck appearance
  • 50+ MPH speed capability
  • High travel independent front suspension and 4-link live rear axle
  • 4X4 drivetrain with viscous torque vectoring differential
  • 4mm Aluminum chassis
  • Metal ring and pinion gears
  • Rear-loading battery
  • Dynamite Fuze 1/6th 1200Kv brushless motor and 160A ESC
  • Coil-Over shocks
  • Fixed motor positions
  • MOD 1.5 spur and pinions
  • Metal-geared 1/6th Spektrum servo
  • Active Vehicle Control (AVC) technology equipped

Approximate Assembly Time: Less than 1 Hour
Ball Bearings: Full Body
Batteries: Sold separately
Body: 4 piece, Screened
Charger: Sold separately
Chassis: 4mm Plate, 6061-T6 Aluminum
Completion Level: Bind-N-Drive
Differential: Bevel Gear, Sealed
Drivetrain: 4WD
Final Drive Ratio: 8.22:1
Front Track: 15.75 (400mm)
Gear Pitch: 1.5 Module
Ground Clearance: 3.0 in (76.2mm)
Height: 11.0 in (279.4mm)
Internal Gear Ratio: 4.88:1
Length: 30.5 in (774.7mm)
Motor Size: 58 x 88 mm 1200kv Non Sensored Brushless
Motor Type: Non-Sensored Brushless
Pinion: 19T
Radio: Bind N Drive - Transmitter Required
Rear Track: 15.75 (400mm)
Servos: 18KG Waterproof 1/6-Scale Servo
Shock Type: Coil Over, Oil Filled Shock
Size/Scale: 1/6
Speed Control: Dynamite Fuze 160A BL Waterproof
Spur Gear: 37T
Suspension: Independent Front/4-Link Rear
Tire Compound: Medium
Tire Diameter: 6.0 in (152.4mm)
Tire Tread: Multi-Terrain
Track: 15.75 (400mm)
Vehicle Type: Off-Road
Water-Resistant: Yes
Weight: 19.45 lbs w/o batteries (8.8kg)
Wheel Diameter: 2.9/4.0 in. One Piece
Wheel Type: 12 Spoke Off-Road
Wheel Width: 2.1 in (53.3mm)
Wheelbase: 19.5 in (495.3mm)
Width: 15.6 in (396.2mm)

You Might Also Like...

You Might Also Like...

Overview

More information about Losi Super Baja Rey 1/6 4WD DT Bind & Drive LOS05018

This is the Losi Super Baja Rey 1/6 Scale Electric Powered Bind & Drive 4WD Desert Truck with AVC Precision Control. Get ready to have your mind blown with the 1/6th scale Losi Super Baja Rey desert truck! This beast is setting new standards with its scale detail and adrenaline-pumping 50+ mph speeds. If you're craving the realistic handling characteristics like the big boys, the long travel solid 4-link rear axle and independent front A-Arm suspension will not disappoint. Top it off with an authentic four piece body, full bodied roll cage, plus driver figures and this truck looks as wicked as it performs. Combine that with the precision control of Spektrum DSMR reliability integrated with locked-in AVC technology and you can SEND IT with confidence!

The foundation of the Super Baja Rey consists of a 4mm, hard-anodized aluminum chassis plate with a 4mm upper deck. For added durability and performance it's integrated with a realistic roll cage made of super-tough composite material. Whether you are hitting the whoops, getting huge air, or just wide open, the 4mm chassis just keeps asking for more! Just like the 1:1 desert trucks, the Super Baja Rey truck comes with a super-rigid roll cage made of super-tough composite material that enhances the truck's scale looks and durability. It is integrated with the 4mm hard-anodized aluminum chassis plate providing the ultimate protection for your truck and electronics.

The vehicle comes equipped with a Dynamite Fuze 1200Kv brushless motor and waterproof 160A ESC. This potent combination can handle 6-cells of LiPo power and will allow you to hurtle across the landscape at speeds of up to 50+ mph. With the SRS6000 receiver, drivers get the stability control of AVC (Active Vehicle Control) technology. The SRS6000 features six channels of control outputs, which makes it a great choice for vehicles that need controls for shift servos, dual motors, dual steering, and more, all while being able to take advantage of AVC technology. It also benefits from steering priority, giving you the ability to adjust how much stability you want in those tight turns.

Includes:
1x Losi Super Baja Rey BND with AVC Technology: 1/6-Scale 4WD Desert Truck
1x Spektrum 6-Channel DSMR AVC2 Surface Receiver (installed)
1x Spektrum 18KG Waterproof 1/5-Scale Servo (installed)
1x Dynamite Fuze 160A BL WP 1/5-Scale ESC: 8S (installed)
1x Dynamite Fuze Brushless Motor 1200Kv (installed)
1x Product Manual

Requires:
DSMR compatible, 4+ channel, surface transmitter
Two 2 or 3 cell, 5000+ mAh 50C LiPo battery with EC5 connector
Compatible LiPo charger

  • Realistic desert truck appearance
  • 50+ MPH speed capability
  • High travel independent front suspension and 4-link live rear axle
  • 4X4 drivetrain with viscous torque vectoring differential
  • 4mm Aluminum chassis
  • Metal ring and pinion gears
  • Rear-loading battery
  • Dynamite Fuze 1/6th 1200Kv brushless motor and 160A ESC
  • Coil-Over shocks
  • Fixed motor positions
  • MOD 1.5 spur and pinions
  • Metal-geared 1/6th Spektrum servo
  • Active Vehicle Control (AVC) technology equipped

Approximate Assembly Time: Less than 1 Hour
Ball Bearings: Full Body
Batteries: Sold separately
Body: 4 piece, Screened
Charger: Sold separately
Chassis: 4mm Plate, 6061-T6 Aluminum
Completion Level: Bind-N-Drive
Differential: Bevel Gear, Sealed
Drivetrain: 4WD
Final Drive Ratio: 8.22:1
Front Track: 15.75 (400mm)
Gear Pitch: 1.5 Module
Ground Clearance: 3.0 in (76.2mm)
Height: 11.0 in (279.4mm)
Internal Gear Ratio: 4.88:1
Length: 30.5 in (774.7mm)
Motor Size: 58 x 88 mm 1200kv Non Sensored Brushless
Motor Type: Non-Sensored Brushless
Pinion: 19T
Radio: Bind N Drive - Transmitter Required
Rear Track: 15.75 (400mm)
Servos: 18KG Waterproof 1/6-Scale Servo
Shock Type: Coil Over, Oil Filled Shock
Size/Scale: 1/6
Speed Control: Dynamite Fuze 160A BL Waterproof
Spur Gear: 37T
Suspension: Independent Front/4-Link Rear
Tire Compound: Medium
Tire Diameter: 6.0 in (152.4mm)
Tire Tread: Multi-Terrain
Track: 15.75 (400mm)
Vehicle Type: Off-Road
Water-Resistant: Yes
Weight: 19.45 lbs w/o batteries (8.8kg)
Wheel Diameter: 2.9/4.0 in. One Piece
Wheel Type: 12 Spoke Off-Road
Wheel Width: 2.1 in (53.3mm)
Wheelbase: 19.5 in (495.3mm)
Width: 15.6 in (396.2mm)

Product Videos

Product Questions