E-Flite Park 250 Outrunner Motor Brushless 2200Kv EFLM1130

E-Flite

Item # EFLM1130
$39.99 $31.99
(You save $8.00)
Status: In Stock
UPC:
605482587416
E-Flite Park 250 Outrunner Motor Brushless 2200Kv EFLM1130

More information about E-Flite Park 250 Outrunner Motor Brushless 2200Kv EFLM1130

This is the E-Flite 280 Brushless Outrunner Motor 1800Kv.

Features:
  • Ideal for 3D models 4–6 oz (115–170 g) and sport and scale models 6–12 oz (170–340 g)
  • Up to 55 watts
  • Designed for firewall mount or carbon tube mount
  • Integrated prop saver design
  • Extremely quiet and lightweight—just .5 ounces (14 grams)
  • Upgraded performance motor for indoor IPS and 180 motors
  • High-torque, direct-drive alternative to inrunners
  • Includes mount, mounting hardware and 2mm gold BL connectors
  • High-quality construction with ball bearings and hardened steel shaft
  • Great lightweight outrunner for small indoor foamies

You Will Need:
  • 6–10A brushless ESC
  • 2S Li-Po or 5- to 7-cell Ni-Cd/Ni-MH
  • 5.5 x 4.5–8 x 6 Slow Flyer prop
Type: Brushless outrunner
Size: Upgrade for 180-size
Bearings or Bushings: Two 2 x 5 x 2.5mm Bearings
Recommended Prop Range: 5.5 x 4.5—8 x 6 Slow Flyer
Voltage: 6—8.4V
RPM/Volt (Kv): 2200
Resistance (Ri): .25 ohms
Idle Current (Io): .45A
Continuous Current: 7A
Maximum Burst Current: 8A (15 sec)
Cells: 6 Ni-MH/Ni-Cd or 2 Li-Po
Speed Control: 6A—10A brushless
Weight: 14 g (0.5 oz)
Overall Diameter: 22mm (.85 in)
Shaft Diameter: 2mm
Overall Length: 23mm (.90 in)

Tech Notes:
  • Maximum operating temperature: 220 degrees Fahrenheit.
  • Adequate cooling is required for all motor operation at maximum current levels.
  • Maximum burst current duration is 15 seconds. Adequate time between maximum burst intervals is required.