Great Planes T-370GD Park Flyer Motor System w/C-12 ESC GPMG0455

Great Planes

Item # GPMG0455
$74.99 $39.99
(You save $35.00)
Status: Out of stock
Great Planes T-370GD Park Flyer Motor System w/C-12 ESC GPMG0455

More information about Great Planes T-370GD Park Flyer Motor System w/C-12 ESC GPMG0455

This is the Great Planes ElectriFly T-370 gear drive Park Flyer motor system with the C-12 Electronic Speed Control.


  • Ferrite Motor with Red 2-Pin Connector
  • C-12 Micro Electronic Speed Control
  • 10x4.5 Slo-Flyer Propeller
  • 3.75:1 Gearbox
  • Brass 12 Tooth Pinion Gear
  • Mounting Hardware
  • Full Instruction Sheet

Requires: Installing in aircraft and making connections

Note: If using included propeller, you need to omit the use of the washer or use a thinner washer on prop adapter

  • High-performance power package with the power of 370 motor in a 270 size can
  • C-12 Electronic Speed Control has Safe-Start feature to prevent accidental motor spin at start up, low voltage cutoff to maintain radio control in the event of low battery, 6-8 cell NiCd NiMH, 2-3 cell LiPo input, BEC (Battery Eliminator Circuitry) and pre-installed motor, receiver and Deans battery connectors
  • 3.75:1 gearbox has 12 tooth brass pinion gear for strength and a nylon main gear for quiet, low friction operation
  • Economical bronze bushings in gearbox for long-lasting sport use
  • Lightweight, fiber-reinforced, sealed gear case keeps out dust and debris as well as resisting damage

T-370 Ferrite Motor

Windings: 30 turns of .47mm wire

Maximum RPM (unloaded): 29,000

Rotation Direction: Counter-clockwise

Output Shaft Diameter: 0.079" (2mm)

Output Shaft Shape: Round

Can Diameter: 0.96" (24.4mm)

Can Length: 1.2" (30.8mm)

Endbell Type: Closed

Weight: 1.55oz (44g)

Length: 0.83" (21mm)

Width: 0.45" (11.5mm)

Height: 0.26" (6.5mm)

Weight: 0.27oz (8g) with wires

C-12 Electronic Speed Control

Length: 0.83" (21mm)

Height: 0.31" (8mm)

Width: 0.43" (11mm)

Weight: 0.28oz (8g) with wires

Input: 6-8 NiCd/NiMH cells; 2-3 LiPo cells

Max Rated Current: 12A continuous

BEC Voltage: 5V/1A

Low Voltage Cutoff: .80V per cell for NiCd/NiMH, 2.75V per cell for LiPo

Connectors: Receiver lead- Universal, Battery lead- Deans 2R micro connector, Motor connector- 2mm gold plated female bullet

Switching Frequency: 2.5kHz

Motor Size: 400 or smaller Brushed only