Castle Creations 1/18 Mamba Micro X Car ESC with Motor CSE010-0147-03

Castle Creations

Item # CSE010-0147-03
$120.95 $92.99
(You save $27.96)
Status: In Stock
UPC:
819326011078
Castle Creations 1/18 Mamba Micro X Car ESC with Motor CSE010-0147-03

More information about Castle Creations 1/18 Mamba Micro X Car ESC with Motor CSE010-0147-03

This is the Castle Creations Mamba Micro X waterproof electronic speed control with the 0808-8200Kv brushless motor.

Includes:

  • Mamba Micro ESC
  • 0808 8200Kv Motor with 3.5mm Female Bullet Connectors
  • Motor Leads with 3.5mm Male Bullet Connectors
  • Pre-tinned Battery Leads (require connector to mate with selected battery, 4mm Castle Creations connectors recommended)
  • On/Off Switch
  • Receiver Connector
  • Instruction Booklet
  • Voucher for free Castle Creations Programmer


Requires: Compatible LiPo Battery, recommended battery capacity for 1/18 scale vehicles is 1500mAh, 30C or higher continuous discharge and pinion and spur gear depending on application

Note: Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.

ESC:

  • For 1/18 scale 2 or 4 wheel drive vehicles weighing up to 2.25lbs (1.02kg)
  • Heavy-duty BEC (battery eliminator circuit) handles high-draw digital servos
  • Adjustable settings include: Throttle, Punch Control, Braking Curve, Reverse Type, Drag Brake, Motor Type and Auto LiPo Cutoff
  • Profiles can be custom designed on a PC with the Castle Link PC programming software (software not included, can be downloaded for free from Castle's website, voucher is included for free Castle Link Programmer)
  • Programmable Auxiliary Wire (AUX) allows adjustments to several settings such as torque control and max throttle from a compatible transmitter

8200Kv Motor:

  • Ideal for on and off road applications running up to 2S LiPo’s, and weighing up to 2.5lbs (1134g)
  • 4 Pole brushless, Sensorless design

ESC

Input Voltage Range: Min. 2S LiPo, Max. 3S, 12.6V

BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V

Brake: Proportional

Reversible: Yes, with lockout

On/Off Switch: Waterproof

Dimensions: 1.61x0.75x1.10" (41x19x28mm)

Weight: 1.20oz (34.01g) without connector


Motor

Maximum Input Voltage: 2S LiPo

Maximum Operating Temperature: 180ºF (82ºC)

Motor Size: 1.5x0.79" (38x20mm)

Shaft Diameter: 0.08" (2mm)

Weight: 1.8oz (50g)

Mounting Hole: 1/2" 14mm, 5/8"

Connectors: 3.5mm gold female