This is the 1/18 scale Mamba Micro X Waterproof ESC with a 0808-4100kV motor from Castle Creations. The Mamba Micro X packs extreme power and control into a small footprint - small enough for most 1/18th scale vehicles! The waterproof Micro X is perfect for 2WD or 4WD vehicles weighing over 1.5lbs and up to 2.25lbs. The Micro X and Castle Creations Mighty-Mite 0808 brushless motors make for an incredible brushless power system upgrade for the Mini-LST, Half-Eight, Mini-Quake, and Spyder vehicles.
Just like the other Mamba X Series ESCs, the new Mamba Micro X comes with even more extreme performance and capabilities than the model it replaces. The new Micro X receives a heavy-duty BEC (battery eliminator circuit) to handle today's high-draw digital servos and also features a programmable Auxiliary Wire (AUX) that allows the user to make on-the-fly adjustments to several settings, such as torque control and max throttle, directly from a compatible transmitter. This lets you fine-tune the performance of the Micro X to meet changing driving conditions.
1x Mamba Micro ESC
2x Motor Leads with 3.5mm Bullet Connectors
2x Pretinned Battery Leads
1x On/Off Switch
1x Receiver Connector
1x Instruction Booklet
Compatible motor and a LiPo battery. The recommended battery capacity for 1/18 scale is 1500mAh, 30C or higher.
Requires connector to mate with selected battery, 4mm Castle Creations connectors recommended.
Voucher for free Castle Link Programmer.
Not intended for operation while submerged in liquid. If the unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
Input Voltage Range: Min. 2S LiPo, Max. 3S, 12.6V
BEC Specifications: Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
Reversible: Yes, with lockout
On/Off Switch: Waterproof
Dimensions: 1.61 x 0.75 x 1.10" (41 x 19 x 28mm)
Weight: 1.20oz (34.01g) without connector
Maximum Input Voltage: 3S LiPo
Maximum Operating Temperature: 180ºF (82ºC)
Motor Size: 1.5 x .79" (38 x 20mm)
Shaft Diameter: .08" (2mm)
Weight: 1.8oz (50g)
Mounting Hole: 1/2" 14mm, 5/8"
Connectors: 3.5mm gold female