LRP Brushless Combo Flow Works Team X20 17.5T LRP81132

LRP

Item # LRP81132
$469.99 $269.99
(You save $200.00)
Status: In Stock
UPC:
4250068152319
LRP Brushless Combo Flow Works Team X20 17.5T LRP81132

More information about LRP Brushless Combo Flow Works Team X20 17.5T LRP81132

This is the Flow Works Team sensored brushless speed control and the X20 17.5T Stock Spec brushless motor from LRP.

Includes:

  • LRP Flow Works Team sensored brushless ESC with 12 AWG motor and battery wires
  • Universal receiver connector
  • On/Off switch
  • Sensor wire
  • Four zip ties
  • Instruction manual
  • X20 Stock Spec 17.5T brushless motor

ESC

  • On road and off road software for modified and stock classes including boost 0
  • Seven fully adjustable parameters; Auto Brake, Feel, Torque Timing, Boost Timing, Boost Angle, Boost Turbo, and Cutoff Voltage
  • 6A/3V linear BEC
  • New, precise X-Brake Pro brake software
  • USB software updateability
  • Internal Temp Check System 3 allows readout of maximum internal temperature of ESC and motor
  • Full aluminum case with heatsink
  • Easysolder U tab design Heavy copper, multilayer PCB for low resistance

 

Motor

  • XTEC X20 Coolmax Housing, machined 7075-T6 aluminum can with maximum cooling for lowest running temps
  • Precision-balanced WorksTeam 12.45mm sintered rotor
  • Fully waterproof, adjustable precise sensor
  • Oversized ABEC 5 ball bearings
  • Optimized racing stack for improved drive feel and efficiency
  • Five timing inserts with degree markings

ESC

Case size: 1.2 x 1.3 x 0.83" (32 x 34 x 21mm)

Voltage Input: 3.7 - 7.4v

BEC: 6.0V/3.0A

Forward/Brake: YES

Power Wires: 3.3mm

Rec. Motor Limit: 3.5T

Rated Current: 400A/phase

Typical Voltage Drop: At 20a - 0.011V/Phase

Weight (excl. wires): 1.4oz (40g)

 

Motor

RPM: 16,280

Power (W): 192

Specific RPM/V (kV): 2200

Magnet Material: Sintered 12.45mm

Weight: 5.8oz (165g)

Winding: Star (multistrand copper winding)

Shaft Diameter: 0.125" (3.2mm)