Tekin RSGEN2 ESC - 10.5 Gen2 Sensored Bl Motor System TEKTT2426


Item # TEKTT2426
Status: In Stock
Tekin RSGEN2 ESC - 10.5 Gen2 Sensored Bl Motor System TEKTT2426

More information about Tekin RSGEN2 ESC - 10.5 Gen2 Sensored Bl Motor System TEKTT2426

This is the Tekin RS Gen 2 ESC Brushless Electronic Speed Control and 10.5T Redline Gen2 Sensored Brushless Motor Combo.

RS Gen 2 ESC Features:

  • High voltage programmable Battery Eliminator Circuit (BEC)
  • Forward, brake, and reverse operation
  • On-board temperature indicator
  • Gold plated solder posts
  • Self test diagnostics and factory reset
  • QuickTune programming with one-touch radio calibration
  • Compatible with sensored, sensorless, brushless, and brushed motors
  • HotWire PC interface for advanced programming and updating, EZ access programming port (HotWire Interface (TEKTT1450), and Gen 2 Adaptor
  • (TEKTT3825) required)
  • D2 Dual Drive Mode technology
  • Sensor plug for precise commutation with all motors
  • Pit tune mode
  • DGF2 Digital Glitch Filtering V2

10.5T Redline Gen2 Motor Features:

  • Legal in major governing racing bodies
  • CNC machined T 6061 billet aluminum heatsink can with anodized endbell plates
  • High purity copper windings
  • Neodimium sintered magnet
  • Specifically designed for 1/12 scale 1S LiPo and stock racing
  • Dual plug sensor wire harness for all sensored and sensoreless systems
  • High RPM precision bearings
  • Adjustable timing
  • 120 day limited warranty through Tekin beginning at date of purchase

One Tekin RS Gen 2 Brushless ESC with Instructions, Motor and Receiver Wires, 10.5T Redline Gen2 Motor with Sensor Wire

Input Voltage:
4-9 cells, 2S-3S LiPo
BEC: 6.0V/7.4V, 5.5amps
Brushless Mode Motor Limit: 8.5 turn, 540 2-pole (36mm)
Brushed Mode Motor Limit Forward Only: 10 turn
Brushed Mode Motor Limit Reverse: 12 turn
Max Current: 120amps per phase
Timing Profiles: 7 choices on-board
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.0 x 1.3 x .51" (25.4 x 33 x 12.9mm)
Weight: 2.0oz (48g) with wiring

10.5T Redline Gen2 Motor
6.2oz (177g)
Shaft Dimensions: 5 x 15.3mm
Motor Diameter: 1.40" (35.85mm)
Motor Length: 2.03" (51.8mm)
Bearing Dimensions: front: 4x13x5mm rear: 1/8x3/8x5/32"
kV: 4550
Rotor: 13mm