Mugen MBX8 "WE" Worlds Edition 1/8 Nitro Buggy Kit MUGE2025

Mugen

https://www.rcplanet.com/mugen-mbx8-we-worlds-edition-1-8-nitro-buggy-kit-muge2025/
$1,099.99 $659.95
(You save $440.04)
Status: In Stock
Availability: USUALLY SHIPS WITHIN 24 HOURS
(No reviews yet)
UPC:
4944925038709
Availability:
USUALLY SHIPS WITHIN 24 HOURS

Item # MUGE2025

Build Type:
Unassembled Kit
Power Type:
Nitro Power
Scale:
1/8
Skill Level:
Skill Level 5
Vehicle Type:
Buggy
More information about Mugen MBX8 "WE" Worlds Edition 1/8 Nitro Buggy Kit MUGE2025

The MBX8 has a lot to offer! More durable, more acceleration, more runtime, easier to work on, and lightweight. 

Chassis
The MBX8 chassis features a material that is more rigid and durable. The chassis improves steering and is more consistent in bumpy conditions.

Differential and drivetrain
High Traction Differentials are included in the MBX8. The Mugen Seiki HTD provides increased acceleration, longer runtime, and more consistent handling. The HTD's also increase stability, traction and improve handling in bumpy conditions. The HTD has a larger volume diff cup to increase consistency during long main events. This makes it easier to time rhythm sections, better in bumpy and low grip conditions, helps to increase traction, and increases fuel mileage. 

Front and rear gearbox
The gearbox allows you to remove and service the differentials without detaching the suspension arm mounts. Easy access to the front and rear differential. 

Box-shaped suspension arms and arm stiffeners
The front and rear lower arms use an impact resistant material for increased durability. The arms are box-shaped and include arm stiffeners to reduce flex and increase durability. Adjusting the hardness of the lower suspension arms is now possible. This allows you to fine tune the steering and traction from track to track. CFRP plates will be released as an option part. 

Center differential mount & plate
The center differential mounts use a stiffer material and has a top plate that reduces the chassis flex and increases clutch bell, spur gear, and clutch bearing life. The reduced chassis flex also provides more consistent handling in all conditions. The top plate design also makes it easier to adjust the brakes and easier maintenance.

Lightweight one-piece wing mount
The lightweight one-piece wing mount lower the center of gravity. The position of the wing and wing mount is optimized to improve the performance of vehicle. The height of the wing mount is adjustable. This allows you to control the down force on the rear of the vehicle by simply raising or lowering the mount on the shock tower. 

Lightweight high down-force wing
The IFMAR legal wing is lightweight and provides amazing down force and cornering. The underside of the wing uses a design to reduced weight and creates additional down-force.

Enclosed Battery box and updated carbon fiber radio plate
The MBX8 still uses a flat 2S lipo or Life battery, but the receiver battery is now enclosed in a molded battery box. The battery box allows for quick and easy access to the battery. The molded box also helps protect the battery from hard impacts. The battery box is mounted to an updated carbon fiber radio plate. 

Includes:

  • Body
  • Clamping Servo Saver Nut
  • F/R Shock Towers
  • Front bumper
  • Front center and rear center universal joint
  • Wide Offset Wheel Hubs 1mm 2pcs
  • Inline Front Uprights
  • 3mm Front Upright Arm
  • 46T Spur Gear
  • 12T Pinion Gear
  • 42T Conical Gear
  • Center Joint Cup
  • Center Front Dog Bone (84.5mm)
  • Center Rear Dog Bone (115mm)
  • Rear Wing Stay +15mm

Requires:

  • Engine
  • Exhaust
  • Electronics

 

You Might Also Like...

You Might Also Like...

Overview

More information about Mugen MBX8 "WE" Worlds Edition 1/8 Nitro Buggy Kit MUGE2025

The MBX8 has a lot to offer! More durable, more acceleration, more runtime, easier to work on, and lightweight. 

Chassis
The MBX8 chassis features a material that is more rigid and durable. The chassis improves steering and is more consistent in bumpy conditions.

Differential and drivetrain
High Traction Differentials are included in the MBX8. The Mugen Seiki HTD provides increased acceleration, longer runtime, and more consistent handling. The HTD's also increase stability, traction and improve handling in bumpy conditions. The HTD has a larger volume diff cup to increase consistency during long main events. This makes it easier to time rhythm sections, better in bumpy and low grip conditions, helps to increase traction, and increases fuel mileage. 

Front and rear gearbox
The gearbox allows you to remove and service the differentials without detaching the suspension arm mounts. Easy access to the front and rear differential. 

Box-shaped suspension arms and arm stiffeners
The front and rear lower arms use an impact resistant material for increased durability. The arms are box-shaped and include arm stiffeners to reduce flex and increase durability. Adjusting the hardness of the lower suspension arms is now possible. This allows you to fine tune the steering and traction from track to track. CFRP plates will be released as an option part. 

Center differential mount & plate
The center differential mounts use a stiffer material and has a top plate that reduces the chassis flex and increases clutch bell, spur gear, and clutch bearing life. The reduced chassis flex also provides more consistent handling in all conditions. The top plate design also makes it easier to adjust the brakes and easier maintenance.

Lightweight one-piece wing mount
The lightweight one-piece wing mount lower the center of gravity. The position of the wing and wing mount is optimized to improve the performance of vehicle. The height of the wing mount is adjustable. This allows you to control the down force on the rear of the vehicle by simply raising or lowering the mount on the shock tower. 

Lightweight high down-force wing
The IFMAR legal wing is lightweight and provides amazing down force and cornering. The underside of the wing uses a design to reduced weight and creates additional down-force.

Enclosed Battery box and updated carbon fiber radio plate
The MBX8 still uses a flat 2S lipo or Life battery, but the receiver battery is now enclosed in a molded battery box. The battery box allows for quick and easy access to the battery. The molded box also helps protect the battery from hard impacts. The battery box is mounted to an updated carbon fiber radio plate. 

Includes:

  • Body
  • Clamping Servo Saver Nut
  • F/R Shock Towers
  • Front bumper
  • Front center and rear center universal joint
  • Wide Offset Wheel Hubs 1mm 2pcs
  • Inline Front Uprights
  • 3mm Front Upright Arm
  • 46T Spur Gear
  • 12T Pinion Gear
  • 42T Conical Gear
  • Center Joint Cup
  • Center Front Dog Bone (84.5mm)
  • Center Rear Dog Bone (115mm)
  • Rear Wing Stay +15mm

Requires:

  • Engine
  • Exhaust
  • Electronics

 

Product Questions