E-Flite 40-Amp Pro Switch-Mode BEC Brushless V2 ESC EFLA1040B

E Flite

Item # EFLA1040B
$89.99 $74.99
(You save $15.00)
Status: In Stock
Fits Model:
E-Flite LR-1A Pogo 15e
Fits Model:
E-Flite Mini Pulse XT
Fits Model:
E-Flite T-34 Mentor 25
Fits Model:
ParkZone F-27Q Stryker
UPC:
605482079188
E-Flite 40-Amp Pro Switch-Mode BEC Brushless V2 ESC EFLA1040B

More information about E-Flite 40-Amp Pro Switch-Mode BEC Brushless V2 ESC EFLA1040B

This is the E-Flite 40-Amp Pro Switch-Mode BEC Brushless V2 ESC.

Features:
  • Up to 60 amps continuous current with proper air flow and 75 amps burst current (15 seconds)
  • 5A continuous current, 5V switch-mode BEC circuit (proper cooling and airflow required)
  • Stronger BEC for support of most 3-axis stabilization systems
  • Drive up to 7 analog or 6 digital standard-sized servos with the BEC on any recommended input voltage
  • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
  • Finned heat sinks
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start for helis and airplanes
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
  • Utilizes new smaller MOSFET technology to minimize weight
  • Radio system power on/off switch
  • Pre-wired connectors—E-Flite® EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads
Continuous Maximum Current: 60A
Input Connector Types: 13 AWG with E-flite® EC3™ connector
Output Connector Types: 13 AWG with 3.5mm gold bullet connectors
Momentary Peak Current: 15 sec @ 75A with proper cooling air flow
Length: 2.85 in (73.0mm)
Width: 1.30 in (33.0mm)
Height: 0.61 in (15.5mm)
Weight: 2.65 oz (75.0 g)
Cells w/BEC: 3—6S Li-Po or 9—18 Ni-MH/Ni-Cd