Castle Creations Mamba Micro X ESC 2A Peak BEC with Posts CSE010-0162-00

Castle Creations

https://www.rcplanet.com/radio-system/esc-speed-control-surface/castle-creations-mamba-micro-x-esc-2a-peak-bec-with-posts-cse010-0162-00/
$97.95 $79.99
(You save $17.96)
Status: In Stock
Availability: USUALLY SHIPS WITHIN 24 HOURS
(No reviews yet)
UPC:
819326011863
Availability:
USUALLY SHIPS WITHIN 24 HOURS

Item # CSE010-0162-00

Car Parts:
ESC - Speed Control
More information about Castle Creations Mamba Micro X ESC 2A Peak BEC with Posts CSE010-0162-00

This is a Castle Creations Mamba Micro X 12.6V ESC, 2A Peak BEC with Posts. The Mamba Micro X Crawler edition ESC is Castle Creations latest offering for the crawling crowd. This ESC is ideal for the weight conscious builder or where space is limited, used in low speed crawling or trail running in vehicles weighing up to 8lbs on 2s or 3s; it can also be used in slightly more aggressive setups like rock racing and extended hill climbing on vehicles up to 4lbs. Recommended motors include Castle's "Slate" crawler motors (combos available).

If you're looking for a more aggressive setup in a heavier rig, like rock racing and extended hill climbing, then the Mamba X ESC is just what you need. Your ESC will come with Castle Creations new V2.02 firmware that has been enhanced for rock crawling and sensored operation.

Features:

  • New programmable Auxiliary Wire allows you to make "on-the-go" adjustments
  • Telemetry ready
  • Castle Link compatible, adjust settings like:
    • Throttle curve
    • Braking curve
    • Drag brake
    • Auto LiPo cutoff
    • Punch Control
    • Reverse Type
    • Motor Type
  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge
  • Intuitive Demo Mode capability
  • Ability to save setup profiles for later use

Includes:
1x Crawler Edition Mamba Micro X w/solder posts
1x Castle Sensor Harness adapter
1x Coupon for free Castle Link USB adapter
1x Driver's Ed and Quick Start Guides
1x Castle decal sheet

Min. Input Voltage: 2S LiPo
Max. Input Voltage: 3S LiPo (12.6V)
Length: 1.6" (41mm)
Width: 0.75" (19mm)
Height: 1.1" (28mm)
Weight (w/out wires): 1.20 oz. (34g)
Connectors: 4mm male Castle Bullet Connectors
Max. Recommended Vehicle Weight: 8lbs when used for low speed/moderate driving style; 4lbs for more aggressive driving styles.
Telemetry Link Capable: Yes

You Might Also Like...

You Might Also Like...

Overview

More information about Castle Creations Mamba Micro X ESC 2A Peak BEC with Posts CSE010-0162-00

This is a Castle Creations Mamba Micro X 12.6V ESC, 2A Peak BEC with Posts. The Mamba Micro X Crawler edition ESC is Castle Creations latest offering for the crawling crowd. This ESC is ideal for the weight conscious builder or where space is limited, used in low speed crawling or trail running in vehicles weighing up to 8lbs on 2s or 3s; it can also be used in slightly more aggressive setups like rock racing and extended hill climbing on vehicles up to 4lbs. Recommended motors include Castle's "Slate" crawler motors (combos available).

If you're looking for a more aggressive setup in a heavier rig, like rock racing and extended hill climbing, then the Mamba X ESC is just what you need. Your ESC will come with Castle Creations new V2.02 firmware that has been enhanced for rock crawling and sensored operation.

Features:

  • New programmable Auxiliary Wire allows you to make "on-the-go" adjustments
  • Telemetry ready
  • Castle Link compatible, adjust settings like:
    • Throttle curve
    • Braking curve
    • Drag brake
    • Auto LiPo cutoff
    • Punch Control
    • Reverse Type
    • Motor Type
  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge
  • Intuitive Demo Mode capability
  • Ability to save setup profiles for later use

Includes:
1x Crawler Edition Mamba Micro X w/solder posts
1x Castle Sensor Harness adapter
1x Coupon for free Castle Link USB adapter
1x Driver's Ed and Quick Start Guides
1x Castle decal sheet

Min. Input Voltage: 2S LiPo
Max. Input Voltage: 3S LiPo (12.6V)
Length: 1.6" (41mm)
Width: 0.75" (19mm)
Height: 1.1" (28mm)
Weight (w/out wires): 1.20 oz. (34g)
Connectors: 4mm male Castle Bullet Connectors
Max. Recommended Vehicle Weight: 8lbs when used for low speed/moderate driving style; 4lbs for more aggressive driving styles.
Telemetry Link Capable: Yes

Product Questions