DuraTrax IntelliSpeed 12T Modified Reverse ESC DTXM1070

DuraTrax

Item # DTXM1070
$99.99 $64.99
(You save $35.00)
Status: In Stock
Fits Model:
Associated RC10 B44.3
Fits Model:
Associated RC10 B64
UPC:
753600410709
DuraTrax IntelliSpeed 12T Modified Reverse ESC DTXM1070

More information about DuraTrax IntelliSpeed 12T Modified Reverse ESC DTXM1070

This is the Team DuraTrax I-Speed Modified forward and reverse electronic speed control with a Futaba J connector. It is for modified motors down to 12 turns only. ABS Braking for better control in and out of corners, and adjustable reverse-delay, reverse-lockout, and traction control.

Features:

  • Forward and Reverse and ABS Braking
  • Excellent for intermediate to advanced racers
  • Easy Pushbutton Setup
  • Thermal Protected
  • More efficient than mechanical Speed Controls
  • Reverse Lockout
  • LED (Forward and Red-Full Speed, Red and Green-Reverse)
  • Pre-Installed Futaba J Connector
  • Pre-Installed Bullet Type Connectors for Motor
  • Standard (Tamiya Type) Connector for Battery Pack
  • ON/OFF Switch
  • BEC Equipped


Includes: One I-Speed forward/reverse electronic speed control with Futaba J connector and bullet motor connectors, three .1 type capacitors and one instruction sheet

Requires: Installing three .1 type capacitors onto motor with solder, installing onto an electric vehicle, 6 or 7 cell battery and motor (12 turn or above)

Note: The manual states that during the reverse delay/lockout procedure, the ESC will flash just the Red LED light a series of times. This is a typo. The ESC flashes both Red and Green LEDs during this setup procedure.

ON-Resistance: 0.0035

Traction Control: 0.0, 0.1, or 0.2

Reverse Delay: 0.3 or 0.8

Maximum Continuous Current: 232A

Maximum Peak Current: 800A

Number of Cells: 6-7

Size with Heatsinks: 1.48"L x 1.34"W x .57"H

Weight with Heatsink: 2.44 ounces

Connector: Motor- bullet & Battery- standard (Tamiya)

Motor: 12 Turn Modified

Wires: 14 gauge