Futaba 14SGA 2.4GHZ R7008SB Air Bi-Directional Mode 2 FUTK9410

Futaba

Item # FUTK9410
$799.99 $549.99
(You save $250.00)
Status: In Stock
Radio Channel:
14-Channel
UPC:
4513886206825
Futaba 14SGA 2.4GHZ R7008SB Air Bi-Directional Mode 2 FUTK9410

More information about Futaba 14SGA 2.4GHZ R7008SB Air Bi-Directional Mode 2 FUTK9410

This is the Futaba 14SG 2.4GHz 14 Channel Computer Radio System on Mode 2 with a R7008SB Receiver included. This Radio System does not include servos. This is the Mode 2 version, meaning that the left stick controls throttle and rudder and the right stick controls elevator and ailerons. This is also the airplane version, so it has a ratcheted throttle stick and will default to airplane settings when powered up.

Features:
  • Transmits and receives telemetry data with Futaba telemetry sensors (not included, sold separately) to monitor flight data, receive alerts and more
  • Left and right assignable slider switches
  • Six assignable three-position switches
  • One assignable two-position switch
  • Programming port and earphone jack
  • 2.4GHz FASSTest technology is also compatible with Futaba FASST and S-FHSS protocols, allowing this system to be used with any 2.4GHz air receiver Futaba produces
  • 30 model memory with 10 character model naming and 10 character user naming
  • Two assignable rotary knobs
  • One assignable momentary two-position switch
  • S.Bus programmability

Airplane Version Features:
  • Flap setting menu
  • Aileron to camber flap mixing, aileron to rudder mixing
  • Camber mixing, elevator to camber mixing, camber flap to elevator mixing
  • Ailevator
  • Motor mixing
  • Gyro mixing
  • Idle down
  • 7 different wing types, 3 different tail types, 2 different rudder types
  • Differential ailerons
  • Rudder to aileron mixing and rudder to elevator mixing
  • Snap roll, V-tail and airbrake mixing
  • Winglet
  • Fuel mixture mixing (single and twin)
  • Throttle curve (5-point), Pitch curve (5-point)

Includes:
One Futaba 14SG 2.4GHz 14 Channel Computer Radio System on Mode 2 with a R7008SB Receiver

Requires:
Servos of your choice
R7008SB Receiver (FUTL7675)
Receiving Frequency: 2.4GHz FASSTest system
Power Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
Current drain: 75mA
Extra Voltage Port: 0 - 70V DC
Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
Weight: 0.38oz (10.9g)