Futaba 14SGH 2.4GHZ R7008SB Heli Bi-Directional Mode 2 FUTK9411

Futaba

Item # FUTK9411
$799.99 $549.99
(You save $250.00)
Status: In Stock
Radio Channel:
14-Channel
UPC:
4513886206849
Futaba 14SGH 2.4GHZ R7008SB Heli Bi-Directional Mode 2 FUTK9411

More information about Futaba 14SGH 2.4GHZ R7008SB Heli Bi-Directional Mode 2 FUTK9411

This is the Futaba 14SG 2.4GHz 14 Channel Computer Radio System on Mode 2 with a R7008SB Receiver included. This Radio System does not include servos. This is the Mode 2 version, meaning that the left stick controls throttle and rudder and the right stick controls elevator and ailerons. This is also the helicopter version, so it spring loaded throttle stick and will default to helicopter settings when powered up.

Features:

  • Transmits and receives telemetry data with Futaba telemetry sensors (not included, sold separately) to monitor flight data, receive alerts and more
  • Left and right assignable slider switches
  • Six assignable three-position switches
  • One assignable two-position switch
  • Programming port and earphone jack
  • 2.4GHz FASSTest technology is also compatible with Futaba FASST and S-FHSS protocols, allowing this system to be used with any 2.4GHz air receiver Futaba produces
  • 30 model memory with 10 character model naming and 10 character user naming
  • Two assignable rotary knobs
  • One assignable momentary two-position switch
  • S.Bus programmability


Helicopter Features:

  • Pitch/throttle curves (5-point)
  • Swash mix
  • Pitch to rudder mixing
  • Gyro (flybarless support)
  • Hover pitch and throttle
  • Swash AFR
  • Throttle cut
  • 6 swash plate types
  • Throttle hold
  • Throttle mix
  • Fuel mixture
  • Governor (700-3500 rpm)
  • High/low pitch
  • Swash setting (mixing rate, linkage and speed compensation), swash ring (electronic)


Includes:
One Futaba 14SG 2.4GHz 14 Channel Computer Radio System on Mode 2 with a R7008SB Receiver

Requires:
Servos of your choice

R7008SB Receiver (FUTL7675)
Receiving Frequency: 2.4GHz FASSTest system
Power Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
Current drain: 75mA
Extra Voltage Port: 0 - 70V DC
Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
Weight: 0.38oz (10.9g)