Futaba 6J 2.4G SFHSS R2006GS Tx/Rx FUT01004362-3

Futaba

https://www.rcplanet.com/radio-system/radio-transmitters-air/futaba-6j-2-4g-sfhss-r2006gs-tx-rx-futk6000/
$193.99
Status: In Stock
Availability: USUALLY SHIPS WITHIN 24 HOURS
UPC:
4513886206092
Availability:
USUALLY SHIPS WITHIN 24 HOURS

Item # FUT01004362-3

Radio Channel:
6-Channel
More information about Futaba 6J 2.4G SFHSS R2006GS Tx/Rx FUT01004362-3

This is the Futaba 6J 6-Channel 2.4GHz S-FHSS and FHSS Selectable Mode Radio System.
This version does not include servos.

Includes:

Futaba 6J 6-Channel Transmitter
R2006GS Receiver
Instruction Manual
Neckstrap
Smooth Ratchet Plate for Heli Throttle

Requries:

AA Cells: Four for transmitter
Servos of modeler's choice
Receiver battery

  • Selectable S-FHSS and FHSS modes, the included R2006GS receiver automatically adapts to the selected mode
  • Capable of 4 channels only in FHSS mode
  • Fail safe on all channels in S-FHSS mode only (throttle channel only when FHSS mode is selected)
  • 15 model memory with 4 character model naming
  • 40x40 127 segment LCD display
  • Modes 1-4 selectable by pilot
  • R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link circuitry, frequency hopping, spread spectrum design and Dual Antenna Diversity Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
  • Throttle position, mix and low battery warnings
  • Trainer system (trainer cord not included)

Airplane Features:
  • Two programmable mixes and two 5-point throttle curves
  • Two 5-point pitch curves
  • Flaperon with differential rate
  • Flap trim (2 rates)
  • V-tail mixing
  • Elevon mixing

Helicopter Features:
  • Two 5-point throttle curves
  • Three 5-point pitch curves
  • Throttle hold
  • Hover pitch
  • Gyro and revo mixing
  • Four swash plate types (H1, H3, HR3 & H3 w/AFR)
  • Swash AFR (ail/ele/pitch)
  • Throttle mix
  • Electronic swash ring
  • Throttle and pitch delay
Transmitter;
Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
Frame Rate: 6.8ms
Current Drain: 170mA

Receiver;
Modes: FHSS or S-FHSS (auto selectable)
Power Requirements: 4.8V-7.4V
Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)
Weight: 0.29oz (8.3g)
Current Drain: 80mA (@ no signal)
You Might Also Like...

You Might Also Like...

Overview

More information about Futaba 6J 2.4G SFHSS R2006GS Tx/Rx FUT01004362-3

This is the Futaba 6J 6-Channel 2.4GHz S-FHSS and FHSS Selectable Mode Radio System.
This version does not include servos.

Includes:

Futaba 6J 6-Channel Transmitter
R2006GS Receiver
Instruction Manual
Neckstrap
Smooth Ratchet Plate for Heli Throttle

Requries:

AA Cells: Four for transmitter
Servos of modeler's choice
Receiver battery

  • Selectable S-FHSS and FHSS modes, the included R2006GS receiver automatically adapts to the selected mode
  • Capable of 4 channels only in FHSS mode
  • Fail safe on all channels in S-FHSS mode only (throttle channel only when FHSS mode is selected)
  • 15 model memory with 4 character model naming
  • 40x40 127 segment LCD display
  • Modes 1-4 selectable by pilot
  • R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link circuitry, frequency hopping, spread spectrum design and Dual Antenna Diversity Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
  • Throttle position, mix and low battery warnings
  • Trainer system (trainer cord not included)

Airplane Features:
  • Two programmable mixes and two 5-point throttle curves
  • Two 5-point pitch curves
  • Flaperon with differential rate
  • Flap trim (2 rates)
  • V-tail mixing
  • Elevon mixing

Helicopter Features:
  • Two 5-point throttle curves
  • Three 5-point pitch curves
  • Throttle hold
  • Hover pitch
  • Gyro and revo mixing
  • Four swash plate types (H1, H3, HR3 & H3 w/AFR)
  • Swash AFR (ail/ele/pitch)
  • Throttle mix
  • Electronic swash ring
  • Throttle and pitch delay
Transmitter;
Type: 2-stick, 6-channel, FHSS/S-FHSS selectable
Frame Rate: 6.8ms
Current Drain: 170mA

Receiver;
Modes: FHSS or S-FHSS (auto selectable)
Power Requirements: 4.8V-7.4V
Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe
Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)
Weight: 0.29oz (8.3g)
Current Drain: 80mA (@ no signal)

Reviews

  • 1
    Take it or leave it.

    Posted by Dennis Chamberlin on Jul 14th 2017

    I have no idea whether this is a good product or not. There is no information about it on this site, other than price and a picture. I wouldn't buy it, because I don't know what I might get.

Product Questions