Futaba T6J Air 2.4G SFHSS R2006GS 4-S3004 FUTK6001

Sold Out
Related Products:
Sold Out
Sold Out
Sold Out
Sold Out
Add to Cart

Sold Out


Radio Channel, Free Shipping,


Radio Channel:
Free Shipping:
This item qualifies for free shipping! Click Here!


View All



View All



This is the Futaba 6JA 6-channel 2.4GHz S-FHSS and FHSS selectable mode radio system with the R2006GS receiver and four S3004 servos. The 6J transmitter is full range. This is the airplane version with the ratcheted throttle stick.



  • Futaba 6J 6-Channel Transmitter
  • R2006GS Receiver
  • Instruction Manual
  • Neckstrap
  • Servo Tray
  • Mounting Hardware
  • On/Off Switch
  • Ratchet spring
  • Four S3004 Standard Ball Bearing Servos








Requires: AA Cells: Four for transmitter


  • Selectable S-FHSS and FHSS modes, the included R2006GS receiver automatically adapts to the selected mode
  • Capable of 4 channels only in FHSS mode
  • Fail safe on all channels in S-FHSS mode only (throttle channel only when FHSS mode is selected)
  • 15 model memory with 4 character model naming
  • 40x40 127 segment LCD display
  • Modes 1-4 selectable by pilot
  • R2006GS high-voltage (4.8 - 7.4V) 6-channel receiver with Easy-Link circuitry, frequency hopping, spread spectrum design and Dual Antenna Diversity
  • Endpoint adjustment (EPA), sub trims, servo reversing & throttle cut
  • Throttle position, mix and low battery warnings
  • Trainer system (trainer cord not included)









Airplane Features

  • Two programmable mixes and two 5-point throttle curves
  • Two 5-point pitch curves
  • Flaperon with differential rate
  • Flap trim (2 rates)
  • V-tail mixing
  • Elevon mixing





Helicopter Features

  • Two 5-point throttle curves
  • Three 5-point pitch curves
  • Throttle hold
  • Hover pitch
  • Gyro and revo mixing
  • Four swash plate types (H1, H3, HR3 & H3 w/AFR)
  • Swash AFR (ail/ele/pitch)
  • Throttle mix
  • Electronic swash ring
  • Throttle and pitch delay


Type: 2-stick, 6-channel, FHSS/S-FHSS selectable

Frame Rate: 6.8ms

Current Drain: 170mA



Modes: FHSS or S-FHSS (auto selectable)

Power Requirements: 4.8V-7.4V

Compatible Batteries: NiCd, NiMH, LiPo, LiIon & LiFe

Dimensions: 1-11/16 x 15/16 x 5/16" (43 x 24 x 7.9mm)

Weight: 0.29oz (8.3g)

Current Drain: 80mA (@ no signal)


S3004 Servo

Speed: 0.23 sec/60° @ 4.8V, 0.19 sec/60° @ 6.0V

Torque:  44 oz-in (3.2 kg-cm) at 4.8V, 57 oz-in (4.1 kg-cm) at 6.0V

Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16") (40 x 20 x 36mm)

Weight: 1.3 ounce (1-5/16oz) (37 grams)

Connector: "J" type with approx. 5" wire

You Might Also Like...