This is a pair of Hot Racing CNC machined anodized aluminum 90mm big bore shocks for many 1/10 scale off-road vehicles using 90mm shocks. Some applications include, but are not limited to many 1/10th scale truck and buggy front shocks; the Traxxas Bandit front, Nitro Rustler/Slash/Sport/Stampede front, Rustler front, Slash 2WD front, Slash 4x4 front, Stampede 2WD front, Stampede 4x4 front; and other similar vehicles
Extended Length: 90mm
Overall Length: 100mm
Spring: 1.54mm wire, 10-Turn dual rate
2x Assembled Shocks
2x M3x20mm Flat Head Cap Screws
2x M3x18mm Button Head Cap Screws
2x 3mm Countersunk Washers
2x 5.9mm Hollow Balls
4x 1.5mm Thick Spacers
4x 3mm Thick Spacers
Silicone shock oil of modeler's choice and bleeding per the typical bladder shock bleeding procedure
Best used with Team Associated shock Green Slime grease or shock o-ring grease when rebuilding lower seal
Snap ring pliers when rebuilding lower seal
Use spacers as needed for installation.
Can be used with optional Hot Racing springs: SLF48FS261 (progressive), SLF48MR268 (linear), SLF48RS286 (progressive).
See Hot Racing TD90PC06 for progressive damping 90mm shocks.
Accepts optional Hot Racing silicone shock boot RDP34201.
See Hot Racing RTDS90X for replacement shock shafts and pistons.
See Hot Racing RTD910BN for replacement shock ends.
See Hot Racing RTD910RB for a rebuilt kit.
See Hot Racing RTD1010X for replacement bladders and lower seals.