Hot Racing Steel CV Drive Shafts with 12mm Hex Hubs HRASECT288M06

Hot Racing

https://www.rcplanet.com/rc-parts/r-c-car-truck-parts/hot-racing-steel-cv-drive-shafts-with-12mm-hex-hubs-hrasect288m06/
$38.88
Status: In Stock
UPC:
083745350852
Availability:
<span style="color: #D70200;"><strong>Unavailable</strong></span><br /><span style="color: #D70200;"><strong>Sandy, Utah</strong></span>

Item # HRASECT288M06

Car Parts:
Driveline Components
Fits Model:
ECX Torment 2WD
Fits Model:
ECX AMP Desert Buggy
Fits Model:
ECX Circuit 2WD
Fits Model:
ECX AMP MT
More information about Hot Racing Steel CV Drive Shafts with 12mm Hex Hubs HRASECT288M06

This is a pair of Hot Racing CNC machined hardened steel and aluminum pro-slide drive axles for the 1/10 scale 2WD electric ECX vehicles, including the Circuit Stadium Truck, Ruckus Monster Truck, and Torment SCT. Make sure that your vehicles transfer of power is as efficient as possible with these heavy-duty steel CV driveshafts.


Features
:

  • CNC machined ANSI 1045 equivalent hardened carbon steel construction
  • Replaces factory plastic rear drive axles
  • Blue anodized aluminum pin capture rings (design eliminates CV pin set screw)
  • 12mm steel wheel hub hexes
  • Steel is black finished


Tech Specs:
Approximate Overall Collapsed Length: 117mm
Approximate Overall Extended Length: 129mm
Travel: 12mm
CV Pin: 2.5mm diameter, 11.45mm long
CV Coupler Barrel: 4.5mm diameter, 7.3mm long
CV Ball: 8.9mm diameter
Outdrive Screw Pins: M3 Thread, 2.5mm pin, 11mm overall length


Includes:
2x Dual-Slider CV Dual Universal Joint Drive Shafts


Requires:
Recommended to maintain CV joint and shaft spline with grease.
Recommended to use a removable-type locking adhesive on metal-against-metal threads.


Note:
NOT compatible with the ECX Boost Buggy.
Replacement drive hub (connects to gearbox) is Hot Racing RECT288XU.
Replacement outer stub axle shaft is Hot Racing RECT288XA.

You Might Also Like...

You Might Also Like...

Overview

More information about Hot Racing Steel CV Drive Shafts with 12mm Hex Hubs HRASECT288M06

This is a pair of Hot Racing CNC machined hardened steel and aluminum pro-slide drive axles for the 1/10 scale 2WD electric ECX vehicles, including the Circuit Stadium Truck, Ruckus Monster Truck, and Torment SCT. Make sure that your vehicles transfer of power is as efficient as possible with these heavy-duty steel CV driveshafts.


Features
:

  • CNC machined ANSI 1045 equivalent hardened carbon steel construction
  • Replaces factory plastic rear drive axles
  • Blue anodized aluminum pin capture rings (design eliminates CV pin set screw)
  • 12mm steel wheel hub hexes
  • Steel is black finished


Tech Specs:
Approximate Overall Collapsed Length: 117mm
Approximate Overall Extended Length: 129mm
Travel: 12mm
CV Pin: 2.5mm diameter, 11.45mm long
CV Coupler Barrel: 4.5mm diameter, 7.3mm long
CV Ball: 8.9mm diameter
Outdrive Screw Pins: M3 Thread, 2.5mm pin, 11mm overall length


Includes:
2x Dual-Slider CV Dual Universal Joint Drive Shafts


Requires:
Recommended to maintain CV joint and shaft spline with grease.
Recommended to use a removable-type locking adhesive on metal-against-metal threads.


Note:
NOT compatible with the ECX Boost Buggy.
Replacement drive hub (connects to gearbox) is Hot Racing RECT288XU.
Replacement outer stub axle shaft is Hot Racing RECT288XA.

Reviews

  • 5
    Hrasect288m06

    Posted by D Brian on Aug 4th 2017

    I would not recommend these axles! I'm getting a around 5 or 6 battery packs and there snaping the ends off like twigs. After checking on the replacement ends, it's almost cheaper just to buy a new set. How do they come apart! I can't figure it out. Can someone please tell me what is stronger?

Product Questions