Dumas Aeronca C-3 Kit DUM1813


Item # DUM1813
$68.95 $44.99
(You save $23.96)
Status: Out of stock
Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(255,0,0);\'>Available Online Only</b></span>
Dumas Aeronca C-3 Kit DUM1813

More information about Dumas Aeronca C-3 Kit DUM1813

This is the Dumas Aeronca C-3 Kit.

Includes: All balsa, lightweight colored (black and yellow) tissue covering two 1-3/4 (45mm) lightweight foam main wheels, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, and acetate sheet for windows


  • GWS IPS (indoor power system) motor with A ratio gear drive
  • 3 channel radio system (minimum)
  • 2 micro servos
  • 5A ESC w/BEC
  • 2 cell 700mAh LiPo battery
  • GWS 8x6 prop
  • Building and field equipment
  • Constructed of hand selected laser cut balsa
  • Vacuum molded nose cowl
  • Rudder Control: Pull-pull cables
  • Elevator Control: Wire pushrod
  • Servo Placement: Mounted in rails on fuselage
  • Landing Gear: 1/16" diameter wire front, .041 diameter wire rear, requires bending

Length: 22" (559mm)
40" (1016mm)
Wing Area:
329 sq.in. (21.25 sq dm)
Flat bottom, high wing placement
Center of Gravity (CG):
2.5" (63mm) back from the leading edge of the wing at the fuselage side

Control Throws
Elevator, Up and Down: 3/4" (19mm)
Rudder, Left and Right: 1" (25mm)

You Might Also Like...