Dumas Dehavilland DH89 Kit 42" DUM1815

Dumas

https://www.rcplanet.com/rc-vehicles/airplane/dumas-dehavilland-dh89-kit-42-dum1815/
$75.95 $56.99
(You save $18.96)
Status: Out of stock
(No reviews yet)
UPC:
660141018151
Availability:
<span style="color: #D70200;"><strong>Unavailable</strong></span><br /><span style="color: #D70200;"><strong>Sandy, Utah</strong></span>

Item # DUM1815

Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
Airplane
More information about Dumas Dehavilland DH89 Kit 42" DUM1815

This is the Dumas Dehavilland DH89 Kit 42.

Includes: All balsa, lightweight colored (gray) tissue covering two 2 (50.8mm) lightweight foam main wheels, CA hinges, rigging wire, control cables, instruction manual, three full-size plan sheets, acetate sheets for windows, and all hardware to complete this kit

Requires:

  • Two GWS IPS motors (3.5: 1 gear ratio)
  • 3 channel radio system (minimum)
  • 4 micro servos
  • 25A ESC w/BEC
  • 2 cell 1250mAh LiPo battery
  • GWS 7x6 props
  • Building and field equipment


Note
: Motors are hardwired and soldered to speed control

  • Constructed of hand selected laser cut balsa.
  • Vacuum molded nose cone, windshield, engine cowls, nacelles and wheel pants
  • Rudder Control: Pull-pull cables
  • Aileron Control: Flexible control cables
  • Elevator Control: Wire pushrod
  • Servo Placement: Mounted in rails on fuselage
  • Scale Rigging: Functional flying wires and tail braces

Wingspan: 42" (1066mm)
Center of Gravity (CG):
1 5/8" (41.2mm) aft of the upper wing leading edge at the root

Control Throws

Ailerons, Up and Down:
1/2" (12.7mm)
Elevator, Up and Down:
5/8" (15.9mm)
Rudder, Left and Right:
1" (25.4mm)

You Might Also Like...

You Might Also Like...

Overview

More information about Dumas Dehavilland DH89 Kit 42" DUM1815

This is the Dumas Dehavilland DH89 Kit 42.

Includes: All balsa, lightweight colored (gray) tissue covering two 2 (50.8mm) lightweight foam main wheels, CA hinges, rigging wire, control cables, instruction manual, three full-size plan sheets, acetate sheets for windows, and all hardware to complete this kit

Requires:

  • Two GWS IPS motors (3.5: 1 gear ratio)
  • 3 channel radio system (minimum)
  • 4 micro servos
  • 25A ESC w/BEC
  • 2 cell 1250mAh LiPo battery
  • GWS 7x6 props
  • Building and field equipment


Note
: Motors are hardwired and soldered to speed control

  • Constructed of hand selected laser cut balsa.
  • Vacuum molded nose cone, windshield, engine cowls, nacelles and wheel pants
  • Rudder Control: Pull-pull cables
  • Aileron Control: Flexible control cables
  • Elevator Control: Wire pushrod
  • Servo Placement: Mounted in rails on fuselage
  • Scale Rigging: Functional flying wires and tail braces

Wingspan: 42" (1066mm)
Center of Gravity (CG):
1 5/8" (41.2mm) aft of the upper wing leading edge at the root

Control Throws

Ailerons, Up and Down:
1/2" (12.7mm)
Elevator, Up and Down:
5/8" (15.9mm)
Rudder, Left and Right:
1" (25.4mm)

Product Questions