Dumas Stinson Voyager Kit 40" DUM1817

Dumas

https://www.rcplanet.com/rc-vehicles/airplane/dumas-stinson-voyager-kit-40-dum1817/
$67.95 $46.99
(You save $20.96)
Status: Out of stock
(No reviews yet)
UPC:
660141018175
Availability:
<span style="color: #D70200;"><strong>Unavailable</strong></span><br /><span style="color: #D70200;"><strong>Sandy, Utah</strong></span>

Item # DUM1817

Build Type:
Unassembled Kit
Power Type:
Electric Power
Skill Level:
Skill Level 4
Vehicle Type:
Airplane
More information about Dumas Stinson Voyager Kit 40" DUM1817

This is the Dumas Stinson Voyager Kit 40. the Dumas Stinson Voyager Kit is a beautiful model of the Stinson Voyager, designed by Pat Tritle.

Includes: Dumas Stinson Voyager Kit with covering tissue, decals, landing gear, three wheels, instructions, two plan sheets

Requires:

  • Radio: 3-channel with micro receiver & two sub micro servos
  • Motor: Speed 280 w/2.8:1 or higher gear drive
  • Electronic Speed Control: 5A with BEC
  • Battery: 7.2-7.4 NiMH or LiPo
  • Battery Charger: LiPo compatible
  • Propeller: 9x4.7 electric
  • Building and field equipment


Note:
Designed to use stock off the shelf flying hardware for easy affordable flight.

  • Laser cut balsa parts
  • Red covering tissue
  • One decal sheet of peel and stick vinyl
  • Vacuum molded wheel pants and cowl
  • .041" (1mm) diameter landing gear wire that requires bending
  • Two foam wheels 1.75" (44mm) diameter main, one plastic .75" (19mm) tailwheel

Wingspan: 40" (1016mm)

Length: 29" (737mm)

Wing Area: 218 sq in (14.08 sq dm)

Airfoil: Flat bottom, high wing placement

Center of Gravity: 1-13/16" (46mm) back from leading edge of wing at fuselage size

Control Throws

Elevator: 5/8" (16mm)

Rudder: 3/4" (19mm)

You Might Also Like...

You Might Also Like...

Overview

More information about Dumas Stinson Voyager Kit 40" DUM1817

This is the Dumas Stinson Voyager Kit 40. the Dumas Stinson Voyager Kit is a beautiful model of the Stinson Voyager, designed by Pat Tritle.

Includes: Dumas Stinson Voyager Kit with covering tissue, decals, landing gear, three wheels, instructions, two plan sheets

Requires:

  • Radio: 3-channel with micro receiver & two sub micro servos
  • Motor: Speed 280 w/2.8:1 or higher gear drive
  • Electronic Speed Control: 5A with BEC
  • Battery: 7.2-7.4 NiMH or LiPo
  • Battery Charger: LiPo compatible
  • Propeller: 9x4.7 electric
  • Building and field equipment


Note:
Designed to use stock off the shelf flying hardware for easy affordable flight.

  • Laser cut balsa parts
  • Red covering tissue
  • One decal sheet of peel and stick vinyl
  • Vacuum molded wheel pants and cowl
  • .041" (1mm) diameter landing gear wire that requires bending
  • Two foam wheels 1.75" (44mm) diameter main, one plastic .75" (19mm) tailwheel

Wingspan: 40" (1016mm)

Length: 29" (737mm)

Wing Area: 218 sq in (14.08 sq dm)

Airfoil: Flat bottom, high wing placement

Center of Gravity: 1-13/16" (46mm) back from leading edge of wing at fuselage size

Control Throws

Elevator: 5/8" (16mm)

Rudder: 3/4" (19mm)

Product Questions