E-Flite Allusive 2.2m ARF Airplane EFL4925

E Flite

Item # EFL4925
$399.99 $329.99
(You save $70.00)
Status: In Stock
Build Type:
Almost Ready to Fly
Power Type:
Electric Power
Skill Level:
Skill Level 3
Vehicle Type:
E-Flite Allusive 2.2m ARF Airplane EFL4925

More information about E-Flite Allusive 2.2m ARF Airplane EFL4925


This is the E-Flite Allusive 2.2m ARF Sailplane. The E-Flite Allusive sailplane is an interesting breed of thermal soaring ship that’s both an aerobatic sport modelnd a capable glider. Sleek from tip-to-tip and nose to tail, its wings are a fully-balsa sheeted foam core for a strong structure, which also naturally maintains airfoil integrity. The ailerons and ruddervators feature film-hinging that’s sealed at the factory. The removable surfaces of the V-tail are a fully sheeted built-up structure and, like the wings, are covered with Hangar 9 UltraCote covering in a high-contrast scheme.

Just a 3S 2200mAh Li-Po flight pack is required for catching a thermal or grooving around. Thanks to a front fuse diameter of 40mm, a broad range of popular brushless outrunner motors like the E-Flite Power 15 fits inside and has ample cooling. When equipped with a 4-channel radio with V-tail mix, the Allusive 2.2 m sailplane is the most fun you’ll have eluding the end of a great flying day.


  • 4+ channel transmitter and receiver radio system
  • 15-size brushless outrunner motor
  • 40-amp brushless speed control
  • Charger for flight battery
  • 11.1V 3S 2200mAh LiPo flight battery
  • (2) mini servos, (2) thin-wing servos
  • Folding propeller and spinner with folding blade hub
  • Four-channel control with V-tail, ailerons and throttle
  • Two-piece, fully-balsa sheeted, foam-core, plug-in wings
  • Solid carbon fiber wing and stabilizer joiners
  • Complete, high-quality hardware package
  • Factory finished, film hinging on the ailerons and ruddervators
  • Streamlined fiberglass fuselage with a painted finish that’s ready for your electronics
  • Large canopy provides easy access to factory-installed plywood mounting points
  • Built-up, balsa plug-in stabilizers
  • Ready for installation of an E-Flite Power 15 outrunner
  • Fiberglass control horns and pre-bent steel pushrods
  • High-contrast, genuine Hangar 9 UltraCote covering

Wingspan: 87.5 in (2.20 m)
Overall Length: 43.0 in (1.10 m)
Wing Area: 546 sq. in. (35.2 sq. dm.)
Flying Weight: 48 oz (1.40 kg)
Motor Size: Power 15
Radio: 4+ channel radio system with V-tail mixing
Servos: (2) wing servos, (2) mini servos
Trim Scheme Colors: UltraCote White (U870), Pearl Charcoal (U846), Dark Yellow (U889)
CG (center of gravity): 2.5 in (65mm) back from the leading edge at fuselage
Prop Size: 12 x 8 folding
Spinner Size: 1.5 in (40mm)
Speed Control: 40-amp brushless
Recommended Battery: 11.1V 3S 2200mAh 30C LiPo
Flaps: No
Control Throw (Ailerons): 15 degrees up/down
Control Throw (Elevator): 15 degrees up/down
Control Throw (Rudder): 15 degrees right/left
Minimum Age Recommendation: 14 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 3-5 Hours
Is Assembly Required: Yes

You Might Also Like...