This is the electric powered, remote controlled Carbon-Z Cessna 150 2.1m Plug-N-Play from E-Flite. Enjoying a giant-scale flying experience is easier than you might think thanks to the Carbon-Z Cessna 150. This Plug-N-Play version includes a brushless power system and comes with the servos installed. All you need to do is finish some final assembly, install a receiver, charge the battery, and fly!
Incredible Scale Detail and LED Lights
This stunning reproduction of one of Cessna's most popular aircraft measures 84-inches from wingtip to wingtip and comes loaded with scale details. These include things like pre-installed LED lighting, a shock-absorbing nose strut, as well as fully functional flaps and wheel pants. Other scale touches include molded panel lines and control surfaces that are corrugated like those on the full-scale version.
Wide Flight Envelope
The inherent stability of the high-wing Cessna design will immediately put newer pilots at ease. Experienced pilots will love the wide flight envelope and abundance of power. Slow and scale flight, lazy 8S, knife-edge maneuvers, rolling circles - it can do it all!
Brushless Power System and Functional Flaps
The powerful brushless motor is paired with a 60A ESC that can handle a variety of 4-6S 4000-7000mAh batteries so you can make your flying experience as mild or wild as you want. All of this available power, along with the functional flaps, gives the airplane impressive short-field takeoff and landing performance as well.
Fast Field Assembly and Hands-Free Servo Connectors
After initial assembly, you won't need any tools to attach or remove the wings at the field. You don't even have to touch the servo leads. The innovative Hands-Free Servo Connection System automatically plugs in the wing servos and LED light connectors whenever you attach the wing.
Optional Float Set and Accessories Available Separately
You have the option of installing floats with a working water rudder so you can fly off water (requires EFLA5600 and EFLA5605, sold separately). Installation is easy and can be done in a matter of minutes!
Approximate Assembly Time: Less than 1 Hour
CG (Center of Gravity): 95-105mm back from leading edge @ wing root
Completion Level: Plug-N-Play
Flying Weight: 8.9 -9.9 lbs (4.0 - 4.5kg)
Length: 61.8 in (1570mm)
Minimum Required Radio: 5+ channels (Not Included)
Minimum Speed Control: 60-amp brushless (installed)
Motor Size: 50-size brushless outrunner (installed)
Propeller Size: 15 x 7 Electric
Recommended Motor Battery: 4-6s 4000 - 7000mAh LiPo (Not Included)
Servos: (4) 26-gram MG mini servos, (2) 13-gram micro servos (installed)
Spinner Size: 62mm
Stabilizer Tube Length: 272mm
Stabilizer Tube OD: 7mm
Wing Area: 1053 sq in (68 sq dm)
Wing Tube Length: 730mm
Wing Tube OD: 14mm
Wingspan: 83.7 in (2125mm)