E-Flite Carbon-Z T-28 BNF Basic with AS3X Technology EFL1350

E Flite

Item # EFL1350
$649.99 $499.99
(You save $150.00)
Status: In Stock
Build Type:
Bind-N-Fly
Power Type:
Electric Power
Skill Level:
Skill Level 3
Vehicle Type:
Airplane
UPC:
605482593257
E-Flite Carbon-Z T-28 BNF Basic with AS3X Technology EFL1350

More information about E-Flite Carbon-Z T-28 BNF Basic with AS3X Technology EFL1350

 

This is the Carbon-Z T-28 Bind-N-Fly Basic with AS3X Technology.The E-flite Carbon-Z T-28 airplane is a big warbird model with all the benefits that make RC flight fun. Exclusive Carbon-Z construction allows a large airplane such as this to be rigid like a conventional all-wood airframe, yet lightweight so it can have friendly flying characteristics. The durability of the Z-Foam material means that any bumps along the way are simple to repair. Numerous scale details include a cockpit with instruments and pilot figure while the fitted cowl highlights a dummy radial engine. Of course, no warbird would be complete without functional flaps and operational retracts—both are factory installed.

The advanced AS3X (Artificial Stabilization – 3-aXis) system built into the Spektrum 6-channel AR636A receiver is what helps give the E-flite Carbon-Z T-28 a solid look and feel in the air. This helps counter the effects of wind and turbulence by combining 3-axis sensing with specially tuned flight control software. As a result the T-28 is made even better because your workload to fly smoothly is significantly reduced. Start flying right away with your full-range 6+ channel transmitter with Spektrum DSM2/DSMX technology, a 3500–5000mAh 6S 30C 22.2V Li-Po flight battery and suitable charger.

  • Easy to complete final assembly
  • AS3X technology delivers flight performance that’s rock-solid
  • Electric retractable tricycle landing gear (installed)
  • Operational flaps with individual servos (installed)
  • Rigid Carbon-Z construction for a rigid airframe
  • Scale appearance with cockpit and radial engine detail
  • Spektrum 6-channel AR636A DSMX receiver (installed)
  • Powerful 60-Size brushless power system (installed)
  • 7—High-quality, metal-gear servos (installed)
  • Accepts a range of 6S 22.2V Li-Po batteries from 3500—5000mAh
  • Large canopy hatch with latch closure
  • Two-piece, bolt-on wings and stabilizers
  • Vivid trim scheme with U.S. Navy inspired graphics
  • 2-blade propeller (included)
  • Flat-style pin hinges on the ailerons, rudder and elevator
  • Scale landing gear strut details and two-piece main gear doors

Wingspan: 78 in (198 cm)
Overall Length: 63 in (162 cm)
Wing Area: 1073 sq in (70 sq dm)
Flying Weight: 12.0 lbs (5.5 kg)
Engine Size: 50-60 Size
Radio: DX6 (minimum)
Recommended Battery: 22.2V 5000mAh 30C 6S LiPo
Flaps: Yes
Retracts: Yes
Approx. Flying Duration: 8 minutes
Assembly Time: Less than 1 Hour