This is the E-Flite ICON A5 PNP airplane. Like its full-scale inspiration, the E-flite® ICON A5 park flyer makes it easy to discover the thrill of amphibious flight. This Plug-N-Play version comes with a powerful brushless motor, ESC and servos installed. All that’s left for you to do is complete a little final assembly, install the receiver, charge a battery and fly!
Officially Licensed by ICON Aircraft
The officially licensed airframe and trim scheme are based that of the full-scale aircraft so you can enjoy the most realistic experience possible.
Integrated Hull with Removable Landing Gear
One of the distinguishing features of the ICON A5 is its integrated hull and Seawings design that makes water takeoffs and landings remarkably easy. The model’s hull has been designed so that it not only looks realistic but provides the same pilot-friendly handling on the water as the full-scale version. If there’s no water around but you have a suitable patch of pavement, bolt-on landing gear with a steerable nose wheel is included so you can fly almost anywhere.
Big Battery Hatch with Cockpit Details
The entire cockpit section is magnetically secured and easily removed for unfettered access to the model’s spacious battery compartment. The cockpit itself boasts a tinted windshield, painted pilot figure, seatbacks and an instrument panel.
Durable Z-Foam™ Airframe
The airframe is constructed of tough Z-Foam material that is inherently water resistant and can handle the demands of amphibious flying.
Wingspan: 52.5 in (1330mm)
Overall Length: 34.5 in (875mm)
Flying Weight: 44.4 oz (1260 g)
Motor Size: 480-size 960Kv brushless outrunner (installed)
Radio: 4 channel
Servos: 4 total (installed)
CG (center of gravity): (30-35mm) back from the leading edge of the wing
Prop Size: 9 x 8
Speed Control : 30A Brushless ESC (included)
Recommended Battery: 3S 11.1V 2200mAh 30C
Landing Gear: Y
Experience Level: Intermediate
Assembly Time: Less than 1 Hour
Is Assembly Required: Yes