This is the UMX P3 Revolution Bind-N-Fly Basic by E-Flite. The E-flite UMX P3 Revolution biplane is a Mike McConville adaptation of the unique aircraft designed for Skip Stewart Airshows. One glance at its tapered wings and contoured fuselage proves that nothing about this biplane is typical. Enormous control surfaces allow the P3 to execute blinding gyrations and the authority to deliver 3D maneuverability at your command. But no matter how you fly, innovative AS3X technology makes this air show original perform as if you’re at the controls of a giant scale machine that’s been expertly tuned. And even though every aspect of its outline poses new dimensions of performance and maneuverability, you’ll have fun showing it off even if the maneuvers you execute are as simple as a loop or roll.
The advanced AS3X® (Artificial Stabilization – 3-aXis) system built into the Spektrum 6-channel ultra-micro receiver is what helps give the E-flite UMX P3 Revolution biplane an incredibly solid look and feel in the air. It’s a flight experience that will have you feeling like you’re at the controls of an expertly-tuned 3D machine that’s much larger.
Requires: 6+ Channel Transmitter with DSM2/DSMX Technology, 200mAh 2S 7.4V Battery and Suitable Charger
Wingspan: 16 in (523mm)
Overall Length: 15.8 in (400mm)
Wing Area: 85 sq in (547 sq cm)
Flying Weight: 3.03 oz (86g)
Engine Size: 180-size, 3000Kv Brushless Outrunner (installed)
Radio: 4+ channel Spektrum transmitter required
Recommended Battery: 7.4V 200mAh 25C LiPo