This is the Flyzone Albatros Electric Ducted Fan Jet RxR plane. The high-viz trim scheme is already applied. A power system, most onboard gear, and all hardware are ready to go, installed at the factory. And the only assembly that remains is easy and over with in about 15 minutes. Add a receiver and a charged 4S pack and your departure time is minutes after you get to the field.
Give it a hand launch, and it settles down into smooth, easy-handling flight almost immediately. Blip the throttle and it’s suddenly downfield and disappearing fast. Line up for a low pass, push the throttle to the firewall — and feel the rush that you’ve been waiting for.
Includes: RxR Flyzone L-39 EDF Jet with HyperFlow Ducted Fan System, Servos, lightweight Stand, two painted Pilot Figures and Instruction Manual
Note: For advanced pilots only, not suitable for beginning or intermediate pilots. The L-39 reaches speeds of over 90+ mph (145 km/h) and should be flown only at the flying site of an AMA-chartered club. Because this model can quickly disappear from sight, pilots should remain focused on the plane at all times.
Wingspan: 25" (635mm)
Wing Area: 141 sq in (9.1 sq dm)
Wing Loading: 24.5 - 25.5 oz/sq ft (75 - 78 g/sq dm)
Weight Range: 24 - 25oz (680 - 710g)
Length: 31" (780mm)
Center of Gravity (CG): 1-15/16" (49mm) from the leading edge of the wing at the fuselage
Control Throws: Low Rate High Rate
Elevator, up & down: 1/8" (3.2mm) 4º 5/16" (8mm) 10º
Ailerons, up & down: 3/32" (2.4mm) 4º 3/16" (4.8mm) 8º