Flyzone Extra 300SX EP RxR FLZA3024

Flyzone

Item # FLZA3024
$199.99 $169.99
(You save $30.00)
Status: In Stock
Build Type:
RX-TX Ready
Power Type:
Electric Power
Skill Level:
Skill Level 3
Vehicle Type:
Airplane
UPC:
708066030244
Flyzone Extra 300SX EP RxR FLZA3024

More information about Flyzone Extra 300SX EP RxR FLZA3024

 

This is the Flyzone Radio Controlled, Electric Powered, Receiver Ready (RxR) Extra 300SX 3D Airplane. This is the Rx-R (Receiver Ready) version that requires receiver, battery and charger. Includes motor, ESC and servos. 

For nearly 30 years the full-scale Extra 300 has been mesmerizing audiences at air shows around the world. Flyzone's first truly 3D-capable model pays homage to this legendary performer, combining a powerful brushless motor and ESC with an extremely high power-to-weight ratio. The result? An airplane that excels at everything from solid sport flying and precision aerobatics to impressive vertical performance and heart-pumping high alpha maneuvers. If you're an experienced pilot ready to expand your flight envelope, the Extra 300 SX Rx-R is the plane to take you there!

Includes: Flyzone Rx-R Extra 300SX 3D Airplane with Motor, ESC, four Servos, Y-Harness, Landing Gear, Wheels, Covers and Wheel Pants, Spinner Decals and Instruction Manual

Requires:

  • Radio: At least 4 channel transmitter and receiver
  • LiPo Battery: 3S 11.1V 1800-2200mAh 30C LiPo
  • Charger and Charging bag
  • Maintenance and field equipment

  • Construction: AeroCell foam with large double beveled control surfaces
  • Wing: One-piece
  • Aileron Control: Dual servo
  • Motor: 30-35-1000kV brushless Outrunner
  • Electronic Speed Control: 30A with star connector, 3A BEC
  • Servos: Four micro
  • Canopy: Molded clear plastic with magnetically attached AeroCell foam hatch, dashboard decal and pilot helmet
  • Propeller: 10x4.5 black plastic
  • Landing Gear: Prebent wire with 2" (51mm) foam main wheels and .75" (19mm) steerable tailwheel, magnetically attached landing gear covers and wheel pants that pop off during rough landings to avoid damage
  • Spinner: 1.25" (44mm) diameter red plastic

Wingspan: 41.5" (1055mm)

Wing Area: 297 sq in (19.2 sq dm)

Weight: 28 - 31 oz (795 - 880 g)

Wing Loading: 13.6-15.0 oz/sq ft (42-46 g/sq dm)

Length: 34.5" (875mm)

Center of Gravity (CG): 2-1/2" - 3-1/4" (64mm - 83mm) back from the leading edge of the wing at the fuselage side

 

Control Throws:     Low Rate     High Rate     3D

Elevator:       3/8" (10mm) 8º     5/8" (16mm) 14º     1-3/4" (44mm) 35º

Rudder:     1-1/4" (32mm) 20.5º     1-3/4" (44mm) 27.5º     2-1/4" (57mm) 34º

Aileron:       1/4" (6mm) 7.5º     3/8" (19mm) 11º       3/4" (19mm) 21º