Flyzone Tidewater EP Seaplane RTF SLT FLZA3330

Flyzone

Item # FLZA3330
$349.99 $259.99
(You save $90.00)
Status: In Stock
Build Type:
Ready to Fly
Power Type:
Electric Power
Skill Level:
Skill Level 1
Vehicle Type:
Airplane
UPC:
708066033306
Flyzone Tidewater EP Seaplane RTF SLT FLZA3330

More information about Flyzone Tidewater EP Seaplane RTF SLT FLZA3330

 

This is the Flyzone Tidewater EP Seaplane RTF SLT Float Plane.

Make the Flyzone Tidewater your first (or next) float plane! Fast to assemble without using glue, the Tidewater boosts your confidence with easy water handling and predictable flight characteristics. Takeoffs are a snap with the Flyzone Tidewater; whether from grass, water, or by hand. At full throttle, the Tidewater is powerful and fast. When it's time to land, just point the plane into the wind, reduce speed and keep the wings level - it almost lands itself!

Includes:

  • Flyzone Tidewater EP Seaplane RTF SLT Float Plane with a Tactic 2.4GHz TTX404 4-channel transmitter
  • TR624 6-channel receiver
  • 28-30-1300 kV brushless outrunner motor
  • 30A ESC
  • 9x4.5 ElectriFly PowerFlow Slo-Flyer Propeller
  • ElectriFly 3S 11.1V 2200mAh 30C LiPo Battery with Deans Ultra Plug
  • 3S balancing LiPo Smart Charger
  • Two Tip Floats
  • Instructions
  • Four AA Batteries
Features:
  • Made of foam
  • One-piece wing design with motor and pod, wing attaches to fuselage with 1/4-20x2 nylon wing bolt
  • Dual servo Aileron Control
  • 28-30-1300 kV brushless outrunner motor
  • Tactic 2.4GHz TTX404 4-channel transmitter with TR624 6-channel receiver
  • 30A Electronic Speed Control
  • Micro Servos
  • ElectriFly 3S 11.1V 2200mAh 30C LiPo Battery with Deans Ultra Plug
  • Great Planes 3S balancing LiPo Smart Charger
  • 9x4.5 ElectriFly PowerFlow Slo-Flyer Propeller, made of plastic
  • Landing Gear is made up of two tip floats on either side of wing
  • Warranty (through the manufacturer): Flyzone guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.
Wingspan: 41.5 in (1055mm)
Length: 36 in (915mm)
Weight: 32 oz (905g)

Center of Gravity
Forward CG:
1-3/4" (44mm)
Recommended CG: 1-7/8" (48mm)
Aft CG: 2" (51mm)

Control Throws
Low Rate
Elevator:
1/4" (6mm)  12 degrees
Rudder: 1/2" (13mm) 14 degrees
Ailerons: 1/4" (6mm)  11 degrees

High Rate
Elevator:
7/16" (11mm) 15 degrees
Rudder: 7/8" (22mm) 24 degrees
Ailerons: 1/2" (13mm) 23 degrees

Note: All measurements are from the leading edge of the wing at the fuselage side

You Might Also Like...