Great Planes Avistar GP/EP Sport Trainer ARF Airplane GPMA1675

Great Planes

Item # GPMA1675
$649.99 $429.99
(You save $220.00)
Status: In Stock
Build Type:
Almost Ready to Fly
Power Type:
Gas Power
Skill Level:
Skill Level 4
Vehicle Type:
<span><b>Sandy, UT</span><br/><span style=\'color: rgb(12, 131, 0);\'>Available Now!</b></span>
Great Planes Avistar GP/EP Sport Trainer ARF Airplane GPMA1675

More information about Great Planes Avistar GP/EP Sport Trainer ARF Airplane GPMA1675


This is the Great Planes Avistar 30cc/EP Trainer. Add the Avistar 30cc/EP to your hangar today for giant-scale sport training — and it will continue giving you new opportunities to try optional flaps, floats, and even sailplane towing. Easy to fly for less experienced pilots, yet with the power and maneuverability to satisfy seasoned fliers, it’s the perfect introduction to gasoline engines or large electric power.

Includes: ARF Avistar Trainer with clear plastic Windshield, Side Windows removable black ABS Cockpit Floor, Decals, Landing Gear Wheels and Instruction Manual


  • Radio: 4-6 channel
  • Servos: Five high-torque, additional servo for throttle when using gas power
    Gasoline Power
  • Engine: 30-35cc gasoline engine
    Electric Power
  • 63-62-250kV electric motor
  • ESC: 60A
  • LiPo Batteries: Two 4S 14.8V 5000mAh, or two 5S 18.5V 5000mAh
  • LiPo charger and charging bag
  • Propeller, building and field equipment
  • Construction: Balsa and ply
  • Wing: Two-piece with pre-hinged control surfaces, flaps can be made operational for slower takeoffs and light landing speeds 1.2 x 15.1" (30 x 384mm) aluminum joiner tube
  • Cowl: Painted fiberglass
  • Wheel Pants: Painted fiberglass
  • Landing Gear: Taildragger, 3.5" (89mm) foam main wheels, 1" (25.4mm) rubber tail wheel, one-piece prebent aluminum front section, for a tricycle setup, use the Nose Gear Conversion set GPMA4568, and Nose Gear Wheel Pant (conversion set, wheel pant and float kit not included, must be purchased separately)
  • Motor Mount: Plywood
  • Engine Mount: Plywood standoff for DLE engine, metal standoffs (not included) required for mounting O.S. engine
  • Spinner: Aluminum, 3" (76.2mm) diameter
  • Fuel Tank: 12oz (355cc) approximately
  • Warranty (by the Manufacturer): Great Planes Model Manufacturing Company guarantees this airplane to be free from defects in both materials and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.

Wingspan: 90.5" (2300mm)
Wing Area: 1448 sq/in (93.4 sq/dm)
Weight: 16.5-17.5lb (7.5-7.9kg)
Length: 77.25" (1962mm)
Wing Loading: 26-28oz. sq/ft (79-85g sq/dm)
Center of Gravity: Between 4-1/2" (138mm) and 5-7/16" (114mm) back from leading edge of wing measured from fuselage

Control Throws:
High Rate
Elevator: 3/4" (19mm) 21º
Rudder: 1-3/8" (35mm) 15º
Ailerons: 3/4" (19mm) 17º

Low Rate
Elevator: 1/2" (13mm) 14º
Rudder: 1" (25mm) 11º
Ailerons: 1/2" (13mm) 12º

You Might Also Like...